Quick Question!

Have you ever purchased from PartSelect.com before?

Models > VBXR1070W0WW > Instructions

VBXR1070W0WW Hotpoint Washer - Instructions

All installation instructions for VBXR1070W0WW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the VBXR1070W0WW
391-405 of 588
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Washer was not running

  • Customer: Susan from Old Orchard Beach, ME
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Found out the screw was stripped from the agitator, probably because the washer is over 10 yrs old. We got the right part! The parts store was very fast in shipping, in fact we got it the next day! Highly recommend PartSelect!!!!!!!!!!

Agitator not moving

  • Customer: Erik from Raleigh, NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Removed fabric softener cover by pulling up. Then removed agitator by grabbing at the bottom and pulling up. Note I did read online that some may have a bolt holding the agitator down thats what it seemed like when I read it. Mine did not have a bolt. after removing the agitator there is a 10 or an 11mm bolt holding it down remove that and the coupler comes right out then install in reverse order. All done. Also its a ge adora washer.

water would sometimes overflow on floor

  • Customer: Waldemar from Poway, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced dual inlet valve. Problem solved

The existing drain hose was missing and the clip was broken.

  • Customer: Tammy from Boone, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Inserted the drain hose and attached the clip. First test of repair leaked. Then I "fully" inserted the hose and fixed the leak.

3 of the 4 dampening straps were broken.

  • Customer: Walter from woodland, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Watched the video from your web site and followed the instructions. Didn't need to remove the console on my model.

water leaking from bottom of washer

  • Customer: jeffrey from willard, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
removed back off washer, disconnected pump from washer tub, remove old pump in about 5 min, then installed new pump in less than 5 min. washer is working just fine wife thank me it was about 2 wks since the washer was down.

lid switch actuatof

  • Customer: Krista from Rock Hill, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pop out pop in, just that simple.

cold water would not stop running

  • Customer: Kelvin from Richland Hills, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Took out the old part and easily replaced it with the new part.

not agitating

  • Customer: linda from cape coral, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
pulled out the center agitator, undid the nut , put the new one on , easiest repair ever, less that 13 dollars. and the part came in 2 days, wow, I am impressed with your company!!!!!

violent shaking of tub in spin cycle

  • Customer: Thomas from Chelmsford, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Reading all the reviews and drawing from the experience shared on Parts Select for this problem saved me a lot of time and money. Two particular remarks saved my day: - always buy the hub nut, Part Number PS271505 when you have to replace the Inner Tub Base Hub, Part Number PS273296 and do not even attempt / waste time to try to loosen the hub nut, just use a chisel and remove it that way. The replacement of the parts where simple and quick after the hub nut was gone, the result is a working washer. Doing this myself saved me a couple $100.-'s as we where quoted well over $200.- by a repair company to fix this and it is really a simple thing to do yourself. Shipping of the parts was extremely quick - thanks for the great service

Washer would not pump water out of basin

  • Customer: Pamela from Wiscasset, ME
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I purchased the part, watched the video that was embedded in the email I received, folllowed the instructions and was able to wash my laundry. It could not have been any easier unless the the part caem already installed. Thank you.

Washer wouldnt drain

  • Customer: Scott from Meriden, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
First I removed the front cover, Drained out water by hand, Romoved two drain hoses going into old pump,removed the electric very easy it was two wires,installed new pump and reconected all. Now my wife is happy again and so am i. Your installation video was the KEY to my success.

Washer was very noisey during agitate cycle.

  • Customer: Bruce from Snowflake, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Pulled agitator by hand, (very easy), removed bolt holding coupling to shaft, removed coupling and installed new one. Tightened bolt snugly and pushed agitator bank over coupling! About 5 minutes to repair!!!!!!!!!

The agitator was not moving

  • Customer: mike from florence, KY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
First I had no idea what to do. My first thought was to buy a new washing machine and so I began searching and found that a washer equal to mine was over $600. I brewed on this for a few days when a neighbor told me that they are not that hard to work on and we should take it apart and look at it first. We took the top and the front of the washer off and looked at the belt and the motor. All seemed fine. (we just used a screwdriver for that) then we took the agitator off, it pulled right off with some heavy tugging. then we saw the coupling. It was only held on by one screw. We used a socket to take the screw out and pulled the coupling off. It is supposed to fit very tightly on a shaft with gears. When we pulled it off and looked inside it, all the plastic gears in the coupling were stripped and that is why the agitator would not move. I expected this to cost me at least $50, but to my surprise the part was only $6.50. The shipping cost more than the part. When it arrived in about 3 days. I literally had the part on and the washer back together in less than 5 minutes. The entire repair cost me $14 and now the washing machine works better than it has worked in years. Who knew. If you intimidated by working on washers, don't be, they really are very simple machines and so not worth calling a repair man for.

Leaking hose

  • Customer: Cathy from WARMINSTER, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Was very easy to remove and replace. The instructional video let me know what to expect
All Instructions for the VBXR1070W0WW
391-405 of 588