TEF361ESD Tappan Range - Instructions

disconneced the broken element and reconnected the new one. Was very pleased with how fast the new part arrived at my home. Thanks!!!!!!!!!!

It was sooooo easy! Took out two screws and replaced baking element replaced the two screws DONE Thanks

Followed instructions provided by online services. Very easy to follow.

new element

Really easy to install!!! We got a quote to repair our oven for over $200.00 Ordered a bake element for less than $35 with shipping and my husband replaced it in couple of minutes. We saved a lot of money!!!

Replaced the Bake Element. Very easy, 2 Screws, pulled out old one and put new one in.

removed screws where element goes through the back wall,pull element out gently,exposing the connection -mine were fork&tongue ,pull off connector(not the wire!)Don"t let the wires slip back in.Check connector&wire for wear.Reverse steps to install.

Took the old unit out with a small nut driver real fast. Be careful the inside of the oven is small and the metal is thin it will dent if you lean to hard. But that is not the story the story is how fast my replacement part arrived I ordered on a Monday evening before Christmas and arrived on Wednesday. I had the part in no time. Sears was back ordered (Just Saying) I don't think closing another store will help that. I will try to fix anything but you have to have the part!!!!

The repair was easy. I watched the video from your website. It took me less than 15 minutes to replace the part. I really appreciate how fast the part arrived to my house. My oven is working great.

We removed the old element,which had actually burned in two, and installed the new one. I was extremely impressed with the ease of ordering from this site and very surprised at how fast it was shipped to us. This will be my go-to place for any other parts I might need.

this bake element has two special Hex style screws, securing it in place, but a nut driver worked just as well. remove the baking racks, and then loosen the two hex screws. slowly pull the element out of the back wall and then disconnect the electric leads. reinstall by doing then the opposite action. could not have be simpler.

Turned off the breaker, did not unplug the oven (this should be done as the prongs had residual heat). Removed the plates that held the element in place, detached the element from the wire, attached new element to the wire (the new element was slightly different the wire did not slide down as far as the original). Reattached plates, turned breaker back on, tested oven, voila - done.

I ordered the part very easily. It came quickly. I couldn't have asked for more. Thanks.

My husband and I removed the burnt baking element. Then, I unplugged the range and removed the screws on the back panel of the oven. Secondly,the new element was placed in the oven and the electrical cords were connected. The only problem that I had was trying to place a safety bracket on one of the electrical wires. I did not have the correct type of backet so I used electrical taped to avoid and electrical discharge from occurring. I feel this is the reason the old baking element caught on fire. It was only two years old. We rent and the range is part of the appliances in the house. The oven is working very well.

remove back panel took out old part splice wire replaced