Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TEF351EWD > Instructions

TEF351EWD Tappan Range - Instructions

All installation instructions for TEF351EWD parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the TEF351EWD
466-480 of 758
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The burner coil had been broken

  • Customer: elizabeth from Pasadena, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just plugged it in! The hardest part was finding the model number. It was inside the top of the stove,while cleaning, I found it-on the left hand side when you take out the burner pans. I searched this site, found the part and when it arrived I just plugged it in and it worked fine. I would say less than 5 minutes to fix this issue.

heating element no longer worked

  • Customer: Maryann from Roberts, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
pulled out the range and unplugged the range from the outlet! removed the oven racks. unscrewed the heating element and pulled out the wire connections a bit so i could grasp the connectors better and so they would not go back into the holes. getting the bad element off the connectors was the most difficult part of the process - this is what took the longest for me. I used pliers to grab the heating element connector and wiggle until it came loose from the connectors. once off, it was pretty simple to re-connect the replacement element and tuck everything back and screw the element back onto the oven wall. WA-LA!! back in the baking business - kids and mom are happy again! temp needs calibrating, but should be able to figure that out....thanks much!

old element snapped in two

  • Customer: Jeremy from Springfield, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just unscrew the two screws that attach element to back of oven. Pull element toward door until you see push on terminals. Pull both terminals off.

Burner would no turn off.

  • Customer: ALBERT from BENTONVILLE, AR
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
A Phillips screwdriver and pliers were all the tools required. At first glance, the physical appearances of the OEM and the replacement were not identical. The slide-on electrical tabs were numbered on each in the same way. Sliding off the connectors and re=connecting them on the same number tab on the new switch was all there was to it.

could not control the heat cooking

  • Customer: Robert from HOLTSVILLE, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
removed six nutdriver screws and removed rear cover. the only problem i had was the new switch they sent was a little larger then the orig.had to figure out the wires. fit good and works perfect.

Bake element

  • Customer: Russ from Avondale, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Got the part,very affordable quick shipment,put it in plugged in the wires...Done! Thank you, getting parts from you for my ice maker as well!

Bake Element Shorted Out

  • Customer: Lisa from North Port, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
- Cut the power to the oven (I used breaker). - Unscrew 2 screws. - Disconnect from 2 electric terminals. - Remove old bake element. - Connect new bake element to 2 electric terminals. - Screw the 2 screws back on. - Turn the breaker back on. ------------------------------------------------> Done! . . Saved the $79 that the appliance guy would've charged just for diagnostics. The part shipped to me within 24 hours so I didn't have to worry about scheduling a 2nd appointment and waiting around with no oven. You can do this on your own! Thanks partselect.com :)

Burnt out element

  • Customer: pascale from bridgewater, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Simple. Unscrew 2 screws unplug 2 tabs. Push on 2 tabs. Put 2 screws back adjust feet.

The Bake element broke

  • Customer: Daphne from Henrico, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband did the repair he removed the old element and replaced it with the new one it was very easy to replace.

Element failed to heat

  • Customer: Jeff from Berwick, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench set
  • 0 of 0 people found this instruction helpful
Piece of cake! Unscrewed the old, pulled it out, & put in the new element. Turned the oven on & presto! Oven can now bake!

Lower level heating element

  • Customer: Debbie from Missoula, MT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Easy as one two three. Snap electrical wires to new element push thru back wall of oven and turn screws tight. This company was so amazing and my order arrived in a few days. I found you on the internet. Bless you all .

Lens cover for oven light broke.

  • Customer: Amy from Corona, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.

Replaced heating element

  • Customer: Sheila from Monticello, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I went to video and followed instructions. I removed the holding brace securing the element in and pulled out old heating wire and installed new one that came a day after I ordered it. It was so easy and saved me over $100

bad burner switch

  • Customer: ALBERT from LITCHFIELD, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed six screws on back panel and two holding switch on front panel. pulled wire from switch and placed it on new switch,did same with next four wires. put back panel on .DONE works fine

So easy!

  • Customer: Patricia from Newburgh, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First off the shipping was lightning speed and the repair was super easy anyone can do it.
All Instructions for the TEF351EWD
466-480 of 758