TEF326FBC Tappan Range - Instructions

First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!! I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!

There was a video on here that give the simple instructions. Very easy

Disconnect power cord, removed 2ea nut screws from inside the oven connecting heating element. Pull connectors thru the oven wall. Removed 1ea connector from each element connection. Replaced. Reinstall in reverse order.

This was an easy repair. I was going to call my appliance guy when I read how easy it was to replace on this site I decided to try it myself instead. It was that easy. I removed the old element and installed the new one in under 15 minutes. The video showed how easy it was that I had to try it myself and I am glad I did. I saved a bunch.

First, I looked on you tube for a quick video on how to do the job. Next, I removed the old element by simply removing the two screws. Be careful not to let the wires fall back through the holes. Next, just plug in the new element and put the screws back. Simple! Last time the element broke I paid a repairman $185!!!!!! With shipping this time it cost me about $40!

Per your printed instructions - easy to read and follow

Checked the burner and no power to heat the burner. removed the old switch and put on the new one.

Bought a electric range/oven with a broken glass in the door cheaply because the owner didn't think they could fix the glass. I watched the video on You Tube on how to handle the spring loaded hinges and followed the steps as presented. The toughest part of the job was cleaning all the crud on all of the glass due to the gap in the inner glass. I had to use a square drive and a phillips head screwdriver to disassemble and reassemble the door. It took less than 30 minutes to complete the job and most of that time was cleaning the glass.

Replaced control units that were malfunctioning.

My husband fixed it in about 30 minutes or less. He said it was a piece of cake!

It was so easy. We pulled the stove away from the wall and unplugged it. My husband used a nutdriver to unscrew the two screws holding the element in place. He unplugged the wires from it when he pulled it out. He plugged the wires to the new element, screwed it back in place and voila! I was ready to bake. So very easy.

nothing to it

watched the veido first then un pluged the stove then i took out 6 screws and 2 from the switch and reversed every thing

Undid two screws; removed old element; inserted new element and placed the bracket and two screws to hold in place.

I watched the video--that was very, very helpful. My son helped me, but I think I might have been able to handle it without him after watching the video. Also, your price was far less than half of what another website quoted for the same heating element.