Models > TAX3DNYARWH

TAX3DNYARWH General Electric Refrigerator - Overview

Sections of the TAX3DNYARWH

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Power Cord – Part Number: WR23X10300
Power Cord
★★★★★
★★★★★
(3)
PartSelect #: PS759476
Manufacturer #: WR23X10300
This heavy-duty cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to your refrigerator, allowing it to keep the contents inside cool. There could be an issue wit...
$29.54
  In Stock
THERMO KNOB – Part Number: WR2X8289
THERMO KNOB
PartSelect #: PS298936
Manufacturer #: WR2X8289
  No Longer Available
R134 DRIER – Part Number: WR86X25269
R134 DRIER
PartSelect #: PS12727537
Manufacturer #: WR86X25269
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
$62.27
  In Stock
TRAY ICE CUBE – Part Number: WR30X10009
TRAY ICE CUBE
PartSelect #: PS300038
Manufacturer #: WR30X10009
$7.58
  Special Order
BOLT – Part Number: WR1X5671
BOLT
PartSelect #: PS295129
Manufacturer #: WR1X5671
$6.80
  Special Order
SPRING – Part Number: WR2X7796
SPRING
PartSelect #: PS298640
Manufacturer #: WR2X7796
$7.60
  Special Order
CONTROL TEMP – Part Number: WR9X498
CONTROL TEMP
PartSelect #: PS310864
Manufacturer #: WR9X498
$34.37
  Special Order
EVAPORATOR DOOR – Part Number: WR37X5045
EVAPORATOR DOOR
PartSelect #: PS301680
Manufacturer #: WR37X5045
  No Longer Available
DRIP TRAY – Part Number: WR31X5028
DRIP TRAY
PartSelect #: PS300251
Manufacturer #: WR31X5028
  No Longer Available
BRACKET – Part Number: WR2X8288
BRACKET
PartSelect #: PS298935
Manufacturer #: WR2X8288
$5.25
  Special Order
EVAP DOOR HINGE UPPER – Part Number: WR13X5215
EVAP DOOR HINGE UPPER
PartSelect #: PS290451
Manufacturer #: WR13X5215
$6.86
  Special Order
BUSHING – Part Number: WR2X7802
BUSHING
PartSelect #: PS298646
Manufacturer #: WR2X7802
$6.80
  Special Order

Questions And Answers for TAX3DNYARWH

Be the first to ask our experts a question about this model!

Common Symptoms of the TAX3DNYARWH

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Unit runs,but freezes up, cold controll stuck on.
UNPLUG UNIT;open door, pull straight off,the control knob. Under freezer tray, release white plastic holder containing capillary tube (take note how it fits). Straighten tube. On back of unit; remove 3 screws holding condenser grid. GENTLY pull outward and down the grid just enough to access the 2 screws to the cover. Remove cover. Pull the capillary tube out of unit (white plastic cover on it). Write down where the wires go, unplug them. Remove the two screws holding the control to the unit. Reverse procedure. Take note to center the control, so knob will fit. Install wires. Install cover. Remove white plastic cover on old capillary tube, install it on new part. Gently push tube thru back of unit. Gently fold tube on end and fit into white plastic holder. fit holder under freezer tray. Gently return condenser grid back into place, install the 3 screws. Set control knob to about half way. Plug unit in. use thermometer to set final temperature.
Parts Used:
CONTROL TEMP
  • Tom from Menasha, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!