Quick Question!

Have you ever purchased from PartSelect.com before?

Models > SU980JXR1

SU980JXR1 Frigidaire Dishwasher - Overview

Get Parts and Repair Help for SU980JXR1

If you know the dishwasher repair part you need, you can browse the list of all parts on the SU980JXR1, or you can search by name or part description. You can also find your part by where it is located on the SU980JXR1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


Sold Individually.


Door Seal

It provides a seal between the tub and the door.


Tower Star Gasket


White Lower Rack Roller - almost an inch and a half in diameter.

This part is a rack roller for the dishrack in your dishwasher. This rack roller is meant to be used on the lower dishrack. It is completely white and made entirely of plastic. This part has a diameter of about 1.5 inches, and a height of just over an inch. The support for this roller is available separately. Take note that this part is sold individually. The most common reason for needing to replace this roller is if your current one is broken and is causing your lower dishrack to stick.


O-RING 5/16" DIA









Common Symptoms of the SU980JXR1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leaked Water

  • Customer: Jack from Soddy Daisy, TN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 13 of 23 people found this instruction helpful
First I removed the old seal and comparied it with the new one and they were the same.
Then my wife put the new seal on. I helped her on the corners, very little. She did a very good job and it does not leak now. read more

No Rinse cycle

  • Customer: Tim from Forest Grove, OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Removed the front panel below door, 4 screws. Removed 1 screw that help relay on frame. Moved 3 wires from old relay to new. Installed relay to frame, installed panel and done. read more