Models
>
SRM-2301
SRM-2301 (After S/N 0031001) Echo Trimmer - Overview
Sections of the SRM-2301
[Viewing 9 of 9]
_WW_1.gif&Position=2&mfg=Echo&Type=Trimmer&Mark=2 "Page A Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_2.gif&Position=3&mfg=Echo&Type=Trimmer&Mark=3 "Page B Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_2.gif&Position=4&mfg=Echo&Type=Trimmer&Mark=4 "Page C Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_4.gif&Position=5&mfg=Echo&Type=Trimmer&Mark=5 "Page D Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_5.gif&Position=6&mfg=Echo&Type=Trimmer&Mark=6 "Page E Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_6.gif&Position=7&mfg=Echo&Type=Trimmer&Mark=7 "Page F Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_7.gif&Position=8&mfg=Echo&Type=Trimmer&Mark=8 "Page G Diagram and Parts List for After S/N 0031001 Echo Trimmer")
_WW_8.gif&Position=9&mfg=Echo&Type=Trimmer&Mark=9 "Page H Diagram and Parts List for After S/N 0031001 Echo Trimmer")
Keep searches simple, eg. "belt" or "pump".
Fuel Filter
PartSelect #: PS11826311
Manufacturer #: A369000480
This OEM Fuel Filter is a silver and white, steel/felt, part measuring about 1.25 inches in length and 3/4 inch wide. It can be installed with pliers and is rated as Easy to install by customers.
Th...
$4.91
In Stock
Vent Tube
PartSelect #: PS9322952
Manufacturer #: V471001200
This is the replacement vent tube for your outdoor power equipment. It is made of black plastic and is approximately 3 inches long and ¼ inch thick. The vent tube allows air into the fuel tank so that...
No Longer Available
Fuel Tank Vent
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$6.99
In Stock
Clip
PartSelect #: PS9261895
Manufacturer #: 13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers.
This part attaches to the fuel filter to secure the fu...
$3.99
In Stock
Spark Arrester Screen
PartSelect #: PS8867212
Manufacturer #: 14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of t...
$3.99
In Stock
Nut-Lh Thread
PartSelect #: PS9308872
Manufacturer #: 90051100010
The m10 Left Hand Thread Nut is a 10mm, gold metal part, sold individually. This nut is a "reverse thread". It requires a wrench or socket set to install, and installation is rated as "Easy". Use this...
$3.99
In Stock
Split Pin 2x22
PartSelect #: PS9162863
Manufacturer #: 90030020022
The Cotter Pin (or Split Pin) is a 2x22mm silver metal part, sold individually. It is rated as "Easy" to install, and installation will require a set of pliers. It can be attached in various locations...
$2.99
In Stock
Filter-Air
PartSelect #: PS8862431
Manufacturer #: 13031004560
This OEM replacement air filter is responsible for preventing dirt, debris, and other contaminants from entering and damaging the engine in outdoor power equipment. If the air filter is torn or clogge...
$4.37
In Stock
Questions And Answers for SRM-2301
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Parts Used:
-
Robert from COEUR D ALENE, ID
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I was missing the label for the choke on the air filter.
-
Aidan from THOMASTON, ME
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
