The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and wo...
This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the m...
This bake element kit has two slip on connecters at the rear end and is located at the bottom of the oven.*Please note: this part has been updated by the manufacturer and no longer has a terminal bloc...
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
February 1, 2020
Y does my oven keep beeping? And it shows me an error code of f1.
For model number RSD30
Hello and thank you for writing.
With this error coming and going, the oven becomes all but unusable to you. The F1 error is, as Dacor describes it, a system watchdog circuit used to monitor the bake element relays for a possible failure such as a command to supply heat without receiving an input from the switch membrane. You would have to replace the relay PCB PS4273211. We hope this helps. Please contact us anytime if you require further assistance.