Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RS622GP3BG > Instructions

RS622GP3BG Hotpoint Range - Instructions

All installation instructions for RS622GP3BG parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the RS622GP3BG
301-315 of 417
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken heat element

  • Customer: robert from wernersville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Fit was perfect, slip right in prlace and works great thank u! R.e.Rice

Plastic roller broken

  • Customer: Richard from North Windham, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Smooth and quick. Fit perfectly.

The bake element in my oven caught on fire and burned out.

  • Customer: Sharon from Belfast, TN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband just unscrewed the old element, pulled it out. Then he connected the new up, screwed it in place, turned on the oven and thank goodness it worked. The oven is over 16 years old and I was thrilled to find your site with the bake element picture on a graph which allowed me to measure the angles to see if it would fit. That was a great help.

heating element burned out

  • Customer: Elaine A from Chesapeake, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Turned off electric, uncrewed element in oven. Pulled out old broken part from socket using pliers. Screwed new replacement element in.

Worn out hinge

  • Customer: Joseph L from Mount Pleasant, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just watched the video.

Bake element broke in the middle

  • Customer: Ellen from Columbus, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
WE watched to tutorial video. It was so easy. My husband was proud of himself.

Bottom bake element burned out

  • Customer: DALE from Grand Blanc, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Took 2 screws out.Disconnected element then re-connected new element.Put 2 screws back in.Less then 5 minutes!

surface element not working

  • Customer: Claudine from The Colony, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I simply pulled the old surface burner out, and plugged the new one in. It took less than one minute! The amazing part of this repair, is actually that PartSelect sent the replacement surface element burner OVERNIGHT! I could not believe it, and was VERY impressed with their commitment to help their customers in time of crisis. It arrived just on time for my Thanksgiving not to become a nightmare. Thank you PartSeclect!

no problem

  • Customer: Geneva from High Point, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i do not repair equipment,but this want very well.thank for the video

element sparking and popping and quit working

  • Customer: Michael from Batton Rouge, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First thing I did was turned off breaker to stove. Then I opened oven door to broil position, pulled the door up at that angle and slid off hinges to make it more accessible to work on. Push door hinges to the closed position for safety purposes(reverse this procedure to install door back later). I then unscrewed the two screws that secure the element to the back wall. At this point I detached support clips and used the element to very carefully pull the wires into the oven. I then used my needle nose pliers to hold each of the spade connectors on the wires and pulled the element from the connectors making sure wires don't fall back into the holes. I replaced support clips and carefully slid element back into position and secured it back to the back wall using the two screws, then attached element to the new support clips. I installed the door back, flipped breaker back on and now my oven has a new broiler element in less than 15 minutes. Thanks PartSelect for the speedy delivery and great price.

Heating Element Burned Out

  • Customer: Richard from Muncie, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Unscrewed two hex bolts in back, pulled element out and replaced the two wires on the back and replaced the two screws

Apparently it was the wrong part, because not only my oven is broken, but my whole stove is broken!

  • Customer: Angela from Swansea, IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just like the directions were writen.

Oven Element burned up

  • Customer: Doug from Chanhassen, MN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I watched the video on this website and the instructions were clear and correct. The replacement went flawlessly and we were able to bake Christmas cookies and that bought a lot of people happiness.

The left hinge broke

  • Customer: Judy from Black River Falls, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
It was really easy, and my only problem was getting the 3 screws out. I just used some WD40 and liquid wrench to free up the screws. After those were out I was in BUSINESS!!! I then just screwed in the 3 screws, and used my needle nose pliers to reattach the spring and WA-LAH!!! Done deal.

bad elements...replaced both broil and bake

  • Customer: Douglas from Hadlock, WA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
With the nut driver I unscrewed the two nuts holding the element to the back face of the stove..then pulled the element toward the front of the stove exposing the wiring attached to the element. the clip holding the wire and element comes apart very easy...I did it by hand...make sure the wire does not go back in the hole...make a little crimp so as to keep it available...take the new element and attach the wire clip to it and then carefully feed it back through the hole...screw your screws back in and you are done. Both elements are done the same...would also like to say there was great care in packing and shipping the elements...wish all companys would ship with that consideration
All Instructions for the RS622GP3BG
301-315 of 417