Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RK777G*T8

RK777G*T8 Hotpoint Wall Oven - Overview

Get Parts and Repair Help for RK777G*T8

If you know the wall oven repair part you need, you can browse the list of all parts on the RK777G*T8, or you can search by name or part description. You can also find your part by where it is located on the RK777G*T8 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RK777G*T8

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$36.12

Bake Element - 240V

This is a 240 volt bake element for your oven or range. The kit comes with two installation screws and the element. The element functions by supplying heat from the bottom of the o...

$33.73

Broil Element

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All you need for this simple repair is small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.

$19.14

Broiler Pan - Large

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain....

$1.69

Screws - Package of 12

$5.30

Light Cover

This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existi...

$99.35

Oven Door Gasket

This door gasket or seal is used in ranges and ovens. The rubber gasket creates a protective seal between the oven door and the opening of the oven. The function of this seal is to trap heat and prevent it from escaping when the oven door is closed. If your oven door gasket is ripped, damaged, or you find hot air is escaping from your oven, it is best to replace the gasket to solve the problem. Remember to unplug your appliance from the power source before installing this part. For installation instructions, refer to the manual provided by the manufacturer.

$3.60

Mounting Screw

This screw is less than 1/2 inch in length. It is sold individually.

$19.57

Broil Element Support

This part supports the broil element in the oven.

$5.10

SCREW

$15.92

Washer - 12 Pack

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replacment of the bake unit

  • Customer: Beth from Matthews, NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 544 of 554 people found this instruction helpful
The hardest part was removing the old nuthead screws off the old bake burner. Once those were off installing the new bake element was simple. One screw in each wire terminal, two hex head screws to hold the unit in place. Works like a charm! read more

oven lower burner burned out

  • Customer: james from franklin, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 485 of 565 people found this instruction helpful
Very easy, remove two screws, pull burner unit out slightly, then remove the two screws attaching the wires, one to each side, remove old unit and replace with new unit and replace screws.

Works fine perfect replacement. read more

Bake element was on its last legs, starting to crack but still functional.

  • Customer: Lawrence from San Jose, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 213 of 356 people found this instruction helpful
Removed the racks, unscrewed the back plate which holds the element, unscrewed the leads from the element, removed the old part.

Reversed the process to install the new element.

Turned the oven on for a few minutes to burn any contaminates off the new element, replaced the racks.

And that was it; quite easy. read more