Models > RH1599RBW00 > Instructions

RH1599RBW00 Roper Freezer - Instructions

All Instructions for the RH1599RBW00
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
64 of 125 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer wasn't cooling
Unpluged the freezer
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.

Secured the new thermostat with the new nut and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Parts Used:
THERMOSTAT
  • James from Paden City, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RH1599RBW00
1 - 2 of 2