RGB745WEH7WW Hotpoint Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower (bake) igniter replacement
Instructions included were inadequate. Igniter is held to burner bracket with 2 screws, both of which broke and needed to be drilled out and replaced but were not included with igniter. Wires were not long enough to access ceramic wire nuts without removing oven.
Parts Used:
-
Harry from Fair Lawn, NJ
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat up on bake
Turned off electric power took out bottom drawer removed heat shield by removing 4 screws that held it in place then removed the two screws holding the Oven Igniter unplugged the wires. Put the old wire ends on the new part reversed the process it took about 20 to 25 minutes
Parts Used:
-
Danny from Glasgow, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Replacement of oven igniter
I followed the instructions provided by others to remove the burner assembly to make it easier to access and remove the ignitor screws (1 screw top in front and 2 screws below burner assembly. Removing the entire burner made the repair much easier. Recommend reading through and following the instructions posted - VERY USEFUL info!!
Parts Used:
-
Katherine from Farmer City, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no heat to oven
-
Charles from Abingdon, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Replaced damaged oven rack
I ordered the oven rack on a Tuesday and received it the very next day - was wowed at the service.
Parts Used:
-
Vicki from Irvine, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
oven would't heat
after watching several videos on replacing the igniter I was confident I could replace it but my oven was no where near like the video's after seeing mine inners it was much different the burner would not unplug . wasn't sure if it did due to the different videos, removed the screw from the burner and prop it up with a small block of wood and with a quarter inch drive ratchet removed the igniter the wires were plugged near the stoves extreme left also there was an other igniter at the top of the oven I replaced the bottom and thank god it worked
Parts Used:
-
Donald from Mechanicville, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!