Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RCC3024GB0 > Instructions

RCC3024GB0 Whirlpool Cooktop - Instructions

All installation instructions for RCC3024GB0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the RCC3024GB0
1-15 of 20
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baked on sauce

  • Customer: Julie from Newnan, GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 10 of 14 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce.

The control knobs broke over time. So I couldn't control the burners and I tried some uiversal knobs from Lowe's that was a disaster. I ordered the right knobs and they work great.

  • Customer: Loretta M. from Modesto, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 9 people found this instruction helpful
I simply put the control knobs on the shaft and
they worked great. I love them. Thank you.

Broken Glass Cook Top

  • Customer: Edward from Fort Payne, AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
First , I turned the power off, pulled the unit out, which is a drop in unit. I removed the screws around the glass,removed the broken glass. I then slid the new glass and screws back in place . Put unit back , turned power on and the job done in about 30 minutes.

broken knob

  • Customer: Larry from Rockingham, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 9 people found this instruction helpful
removed the old and replaced with new

cook top was broke

  • Customer: Ed from Bellefontaine, OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 6 of 11 people found this instruction helpful
we removed the old cook top sixteen screws and four bolts was removed put the new top back on and put all the screws and bolts back in job done

Range element shorted out

  • Customer: Dennis from Seattle, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 10 of 25 people found this instruction helpful
I priced a new two-burner unit and it was going to cost $300. I took the broken unit apart, saw that it was an element that had suffered catastophic failure and found partselect on the internet. $60 and three days later I had the part in hand. The repair was "a piece of cake." Thanks for saving me a lot of money.

Element burned up

  • Customer: Walter from LEWISVILLE, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 2 of 2 people found this instruction helpful
This is a two module cook top That I have, 2 burners in each module. I took it apart take the damaged one out and replaced with the new one, put it back together and turn it on. Heeeyyyy it works. Thanks.(and I'm not an electrician)

large element failed

  • Customer: Charles from Mamaroneck, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 9 of 24 people found this instruction helpful
Easy removal (lift and pull) of the the two element unit from the Jenn-air stove top. Placed unit right side up on a work surface. used a nut driver to remove 12 screws from the unit. removed the glass cook-top, revealing the two elements. Un-hooked two wires off the old damaged element, placed wires (plug and play) onto the new unit, then replaced the glass cook-top, used the nut driver to replace the 12 screws. Pluged the unit back into the Jenn-air stove top.

Heating element not working on one burner

  • Customer: James from FLORISSANT, MO
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 1 of 1 people found this instruction helpful
Removed module replaced radiant element very easy repair.

left front burner no working

  • Customer: CHARLIE from IRVINE, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 6 of 23 people found this instruction helpful
hot wire contact on burner corroded and burned.
wire fell and shorted out the infinite switch. Unplugged the unit from the wall . undo the screws secured the range top and lift to access burner element from the bottom. Transfer all connectors from the old switch to the new one then unscrew the old switch and install the new one. Plugged in the unit and test the burner.

Replace a glass stove top heating element

  • Customer: Derek J. from Lincoln, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
It is essential to talk to Sheren in costumer service to ensure you get the right diameter part. Partselect advertize 8 inch and 9inch diameter parts. I found 8 inch diameter parts can be as large as 9 inchs. Further 9 inch diameter parts can be as large 9.75 inchs, With the right part installation is a snap! My wife is very happy.

Needed stove top cleaner and scraper

  • Customer: Doris from Camden-Wyo., DE
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Absolutely perfect, no problems

Small burner burned out on cooktop.

  • Customer: Kevin from Hurricane, WV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pulled cooktop up on Counter top and unscrewed the screws around around the cook top lifting the glass top off to get to bad burner.then disconnected wires from old burner lifting burner out and sitting new burner down in the cut outs. I have used parts select for my refrigerator,microwave and oven I can't say enough about how great there website is as well as there service.they have made a customer out of me for life and I have turned a lot of friends on to the site and they love it as we'll.

Burner knobs broken

  • Customer: ANTHONY from HOUSTON, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pulled old knobs off and replaced with new knobs from PartSelect. I'm glad they had them, no one locally had them available.

The rear burning on cook top cartridge would not work.

  • Customer: Mary from Baldwin, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unscrewed the glass surface from the bottom portion where the element lays. I gently unplugs the element and plugged in the new element. Then screwed it back together.
All Instructions for the RCC3024GB0
1-15 of 20