Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PDW8280J10SS > Parts

PDW8280J10SS General Electric Dishwasher - Parts

All parts for the General Electric Dishwasher PDW8280J10SS

Below is a list of all parts for the General Electric Dishwasher PDW8280J10SS. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the PDW8280J10SS
29-42 of 121
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Hinge Cable Pulley

Aids in the opening and closing of the dishwasher door.


Upper Dishrack Kit

This is the complete dishrack. Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.


Lower Spray Arm Bearing


SCR 8-32 B HXW 1.13 SS


Drain Pump

The pump ejects the water from the dishwasher.


Heating Element




Circulation Pump Impeller Kit

This impeller and motor shaft seal kit is used in dishwashers to rebuild the circulation pump. If your dishwasher has any of the following symptoms, replacing the part could be the solution: circulation pump is leaking, not cleaning dishes, not draining, making loud or odd noises. The tools needed for this repair are an adjustable wrench, 1/4 inch nut driver, 5/16 inch nut driver, Phillips screwdriver, flathead screwdriver, flat file, and needle nose pliers. Remember to unplug your dishwasher before installing this part and refer to the manual provided by the manufacturer for installation instructions and a detailed diagram.


Sump Filter and Cover

This works in conjunction with the pump and filtration system. It is used to filter the drainage for disposal.


Hose Clamp Kit

This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from leaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.


Hinge Cup


Upper Dishrack Inner Rail

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack.



Size: 10-32 GXTT FLP .595 Sold individually.


SCR 8-18 AB TR 7/8S

All Parts for the PDW8280J10SS
29-42 of 121