All Installation Instructions for PB22H42YT

Needed to replace the bent blades on my riding mower.

- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.

Parts Used:

Blade Mower

Trace from LISLE, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Take the wheel off. Place the key in the slot. Put the wheel back on.

Just described it.

Parts Used:

Key

Gary from PILESGROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lound deck noise when mower put into motion

Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut came off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.

Parts Used: