Models > PB195H42LT

PB195H42LT (2011-07 - 96042013601) Poulan Lawn Tractor - Overview

Sections of the PB195H42LT

[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.08
  In Stock
Bearing – Part Number: 532009040
Bearing
★★★★★
★★★★★
(1)
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$4.77
  In Stock
Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
★★★★★
★★★★★
(1)
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It i...
$3.08
  Special Order
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.08
  In Stock
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
(1)
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.08
  In Stock
V-Belt-Drive – Part Number: 532130969
V-Belt-Drive
★★★★★
★★★★★
(1)
PartSelect #: PS9009376
Manufacturer #: 532130969
$27.47
  On Order
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
$7.16
  In Stock
Ground Drive Fixed Idler Pulley – Part Number: 532194326
Ground Drive Fixed Idler Pulley
PartSelect #: PS9016377
Manufacturer #: 532194326
This ground drive fixed idler pulley is for lawn tractors. 910 inch offset Ground drive fixed idler pulley helps apply tension to the drive belt, allowing the belt to turn. Wear work gloves to...
$11.94
  In Stock
Blade Mower – Part Number: 532138971
Blade Mower
★★★★★
★★★★★
(1)
PartSelect #: PS9286056
Manufacturer #: 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
$14.33
  In Stock
Pulley Idler Flat – Part Number: 532194327
Pulley Idler Flat
PartSelect #: PS9016399
Manufacturer #: 532194327
$11.94
  In Stock

Questions And Answers for PB195H42LT

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Richard
    March 12, 2020
    Front wheels angled outward, how do align the front wheels?
    For model number PB195H42LT
    Hi Richard, Thank you for your question. To adjust the front wheel, you will need to make an adjustment on the track rod. The track rod end attaches the 2 axles together. The track rods are threaded so you can move them to whatever position you want to. You will need to unbolt the nut securing the track rod. Once you have completed this, you will need to loosen the bolt on the track rod end. With the bolt loosened, you will be able to turn the track rod end. Loosen the end until you have it in the position that you need it in and then tighten the nut on the track rod end. Once you have completed this, reattach it to the axle by securing it with the nut. If you require more information on how align the wheels, there are videos on YouTube that you may reference. We hope this helps. Thank you and have a great day.

    Was this helpful?
    Thank you for voting!
    Beecher
    June 30, 2021
    Can you buy the complete rear end for this model Poulan pro riding mower??
    For model number PB195H42LT
    Hello Beecher, Thank you for the question. Very sorry, we only list the parts to the Rear End of the mower, not the full assembly. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!

    Was this helpful?
    Thank you for voting!

      Common Symptoms of the PB195H42LT

      [Viewing 2 of 2]
      Drive system does not work
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
      The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
      Parts Used:
      V-Belt-Drive
      • Lynn from BOILING SPGS, PA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Socket set
      8 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Needed to replace the bent blades on my riding mower.
      - Made the mower safe to work on the blades (remove spark plug wires, etc.)

      - Raised the mower to get access to the blades, wedged a wood block against the blade.

      - Used impact driver with socket to remove bolt holding blade.

      - Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.
      Parts Used:
      Blade Mower
      • Trace from LISLE, IL
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        15 - 30 mins
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Front wheels, too much end play
      Shimmed the wheels out on axle.. No more slop.
      Parts Used:
      Washer 25/32 x 1-1/4 x 16 Ga.
      • Frederick from BINGHAMTON, NY
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        Less than 15 mins
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!