Models > P3314WSA

P3314WSA Poulan Chainsaw - Overview

Models starting with P3314WSA

Keep searches simple, eg. "belt" or "pump".
Fuel Line – Part Number: 530069247
Fuel Line
★★★★★
★★★★★
(4)
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.36
  In Stock
Order within the next 4 hrs and your part ships today!
Engine Fuel Filter – Part Number: 530095646
Engine Fuel Filter
★★★★★
★★★★★
(2)
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel...
$5.09
  In Stock
Order within the next 4 hrs and your part ships today!
Tank Purge Line – Part Number: 530069216
Tank Purge Line
★★★★★
★★★★★
(2)
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$6.36
  In Stock
Order within the next 4 hrs and your part ships today!
Bulb-Purge "snap-in" – Part Number: 530047721
Bulb-Purge "snap-in"
PartSelect #: PS9471212
Manufacturer #: 530047721
$6.36
  In Stock
Order within the next 4 hrs and your part ships today!
Spark Plug (Rcj-8Y) – Part Number: 952030150
Spark Plug (Rcj-8Y)
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...   No Longer Available
Fuel Cap Assembly – Part Number: 580940901
Fuel Cap Assembly
PartSelect #: PS9982262
Manufacturer #: 580940901
This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris...
$6.36
  In Stock
Order within the next 4 hrs and your part ships today!
Carburetor – Part Number: 545070601
Carburetor
PartSelect #: PS9482465
Manufacturer #: 545070601
This is an authentic replacement carburetor which is supplied by the original equipment manufacturer for use with Craftsman chainsaws. The purpose of this part is to mix the air and the gas before the...
$53.54
  In Stock
Order within the next 4 hrs and your part ships today!
Spring-Starter – Part Number: 545008013
Spring-Starter
★★★★★
★★★★★
(1)
PartSelect #: PS9482322
Manufacturer #: 545008013
Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is...
$6.36
  In Stock
Order within the next 4 hrs and your part ships today!
Nut - Bar Mounting – Part Number: 530015917
Nut - Bar Mounting
PartSelect #: PS9469166
Manufacturer #: 530015917
The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.
$3.81
  In Stock
Order within the next 4 hrs and your part ships today!
Kit - Bar Adjust – Part Number: 530069611
Kit - Bar Adjust
PartSelect #: PS9472355
Manufacturer #: 530069611
This Chain Bar Adjuster kit is a kit which contains all necessary hardware for adjusting a chain bar on a chain saw. Installation is rated as "Easy" and requires a screwdriver, wrench set and socket s...
$5.09
  In Stock
Order within the next 4 hrs and your part ships today!
Kit-Clutch Washer – Part Number: 530071945
Kit-Clutch Washer
PartSelect #: PS9472730
Manufacturer #: 530071945
$6.36
  In Stock
Order within the next 4 hrs and your part ships today!

Common Symptoms of models starting with P3314WSA

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fall into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Victor from SCOTTSVILLE, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel and Purge lines had disintegrated
Disassembled it and cleaned fuel tank. Cut and ran new fuel lines, installed filter and reassembled. Parts fit perfectly and got running after not running for over 20 years.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Casper from ERATH, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn out oil pump/burning chains
After checking several different videos, ordered the repair parts and two specialty tools( Clutch removal/install and a worm drive remover/installer) Total for parts and tools around 45.00. Much cheaper than the shop wanted, 85.00 to look at it plus parts. As for results I've used the chainsaw all afternoon no problem. Runs like it did 12 yrs ago. Pumps oil the would make Jed Clampet proud
Parts Used:
Assembly-Oil Pump Gear-Worm Spring
  • William from EVANSVILLE, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!