Models > P3314

P3314 ((TYPE 3)) Poulan Chainsaw - Overview

Sections of the P3314

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Fuel Line – Part Number: 530069247
Fuel Line
★★★★★
★★★★★
(4)
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.36
  In Stock
Tank Purge Line – Part Number: 530069216
Tank Purge Line
★★★★★
★★★★★
(2)
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$5.97
  In Stock
Bulb-Purge "snap-in" – Part Number: 530047721
Bulb-Purge "snap-in"
PartSelect #: PS9471212
Manufacturer #: 530047721
This primer bulb, also known as a purge bulb, is used to push more fuel from the fuel tank into the carburetor of your small engine equipment, to help the engine start easier. Over time and through ex...
$5.97
  On Order
Spark Plug (Rcj-8Y) – Part Number: 952030150
Spark Plug (Rcj-8Y)
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...
  No Longer Available
Fuel Line Fitting – Part Number: 530023877
Fuel Line Fitting
★★★★★
★★★★★
(1)
PartSelect #: PS9469715
Manufacturer #: 530023877
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "E...
$4.78
  In Stock
Assembly-Clutch Drum 3/8" – Part Number: 530057905
Assembly-Clutch Drum 3/8"
★★★★★
★★★★★
(2)
PartSelect #: PS9471808
Manufacturer #: 530057905
  No Longer Available
Carburetor – Part Number: 545070601
Carburetor
PartSelect #: PS9482465
Manufacturer #: 545070601
This is an authentic replacement carburetor which is supplied by the original equipment manufacturer for use with Craftsman chainsaws. The purpose of this part is to mix the air and the gas before the...
$50.27
  In Stock
Kit - Bar Adjust – Part Number: 530069611
Kit - Bar Adjust
PartSelect #: PS9472355
Manufacturer #: 530069611
This Chain Bar Adjuster kit is a kit which contains all necessary hardware for adjusting a chain bar on a chain saw. Installation is rated as "Easy" and requires a screwdriver, wrench set and socket s...
$4.78
  In Stock
Nut - Bar Mounting – Part Number: 530015917
Nut - Bar Mounting
PartSelect #: PS9469166
Manufacturer #: 530015917
The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.
$3.58
  In Stock
Kit-Clutch Washer – Part Number: 530071945
Kit-Clutch Washer
PartSelect #: PS9472730
Manufacturer #: 530071945
$5.97
  In Stock
Pin - Bar Adjust – Part Number: 530015826
Pin - Bar Adjust
PartSelect #: PS9469135
Manufacturer #: 530015826
This Bar Pin Adjuster is an OEM part used to adjust the tension on the bar, which loosens or tightens the chain. It attaches to the slot in the bar, and the chainsaw bar adjusting screw. Installation ...
$4.78
  In Stock
Filter-Air – Part Number: 530057925
Filter-Air
PartSelect #: PS9471815
Manufacturer #: 530057925
$3.58
  In Stock

Questions And Answers for P3314

Be the first to ask our experts a question about this model!

Common Symptoms of the P3314

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fuel line size - Important
Be sure the fuel line is the exact same size (id and od) as the one you are replacing. I had purchased a Fuel line from my local dealer - and after a few hours I figured out that it was the wrong size! He simply cut some line from a spool he had. Didn't bother to look it up! The line from this site was perfect! The id is important because the line has to Compress to go through the hole.
Parts Used:
Fuel Line Tank Purge Line Fuel Line Fitting
  • Lawrence from ORION, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not start , had been sitting for years,
I did not write detail steps , basically remove old carb replaced with new one, reassembled started right up no adjustments were needed !
Parts Used:
Carburetor
  • Sherri from BREAUX BRIDGE, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!