Models > NY58J9850WS

NY58J9850WS (AA-0000) Samsung Range - Overview

Sections of the NY58J9850WS

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Micro Door Switch – Part Number: 3405-001034
Micro Door Switch
★★★★★
★★★★★
(8)
PartSelect #: PS4131192
Manufacturer #: 3405-001034
$17.04
  In Stock
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
Sold individually.
$6.57
  In Stock
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
Range Convection Fan Motor Assembly
★★★★★
★★★★★
(6)
PartSelect #: PS11720787
Manufacturer #: DG96-00110E
The convection fan motor spins the fan blade to circulate hot air through the oven for even heating.
$129.76
  In Stock
Left Rear Burner Cap - Black – Part Number: DG62-00070A
Left Rear Burner Cap - Black
PartSelect #: PS4240973
Manufacturer #: DG62-00070A
$41.19
  In Stock
BURNER-HEAD(AUX);NX583G0 – Part Number: DG62-00076B
BURNER-HEAD(AUX);NX583G0
★★★★★
★★★★★
(1)
PartSelect #: PS5576948
Manufacturer #: DG62-00076B
$55.81
  In Stock
Range Surface Burner Cap – Part Number: DG62-00067A
Range Surface Burner Cap
PartSelect #: PS4240971
Manufacturer #: DG62-00067A
The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
$62.02
  In Stock
RACK ;FLAT;FE;FTQ;FCQ,MWSR-SWRM,629,41 – Part Number: DG75-01001C
RACK ;FLAT;FE;FTQ;FCQ,MWSR-SWRM,629,41
★★★★★
★★★★★
(3)
PartSelect #: PS7321783
Manufacturer #: DG75-01001C
$160.41
  Special Order
Assembly GRATE SIDE;NX58H565 – Part Number: DG94-00937A
Assembly GRATE SIDE;NX58H565
PartSelect #: PS9606629
Manufacturer #: DG94-00937A
$161.59
  In Stock
Convection Fan Motor - Lower – Part Number: DG31-00005C
Convection Fan Motor - Lower
★★★★★
★★★★★
(1)
PartSelect #: PS11735747
Manufacturer #: DG31-00005C
$127.94
  In Stock
BURNER HEAD RIGHT;NX58F5 – Part Number: DG62-00074C
BURNER HEAD RIGHT;NX58F5
★★★★★
★★★★★
(1)
PartSelect #: PS8764922
Manufacturer #: DG62-00074C
$59.68
  In Stock
BURNER-HEAD;NX583G0VBSR, – Part Number: DG62-00075B
BURNER-HEAD;NX583G0VBSR,
PartSelect #: PS5576947
Manufacturer #: DG62-00075B
$34.58
  In Stock

Questions And Answers for NY58J9850WS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the NY58J9850WS

[Viewing 3 of 3]
Doesn’t shut off
Fixed by
these parts
Show All
No heat
Fixed by
these parts
Show All
Won’t turn on
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Convection oven fans were noisy.
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
Parts Used:
Convection Fan Motor - Lower Range Convection Fan Motor Assembly
  • Sue from De Soto, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Touchpad for oven wasn't working, but top gas burners were.
I initially thought I needed a new touch control panel but after a bit of research on the web and numerous videos and articles on replacing the control panel, I found an obscure video and forum where they mentioned that this thermostat fuse has been known to overheat and shut down the oven (touch controls) for safety reason. By the way, my unit is 3 years old and the warranty expired one month ago! I took the top off, found the fuse and tested it with a Multi-meter (again, thanks to some very helpful youtube videos out there). Dead. I figured it was worth a try and ordered the $20 part as opposed to the much more expensive control.

> remove all of the gas burners on the stove (a total of about a dozen screws)
> then remove the top back vent and the screws that hold the top metal piece in place
> you will see the thermostat fuse towards the back in the middle.
> loosen one screw and replace
> put back together in reverse order.

*** You do NOT have to remove the front piece as some videos and articles mention.
The total time should be about 20 minutes. With a little patience and pre-homework, it's easy and you'll save a couple hundred in labor costs.

Good Luck.
Parts Used:
THERMOSTAT;NT-103NC,250V
  • Bob from WILTON, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearing went out on the fan
Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two screws that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm.
John
Parts Used:
Convection Fan Motor - Lower
  • John from NASHVILLE, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!