Models > NX58H5600SS

NX58H5600SS (AA-0001) Samsung Range - Overview

Sections of the NX58H5600SS

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Range Oven Temperature Sensor – Part Number: DG32-00002B
Range Oven Temperature Sensor
★★★★★
★★★★★
(6)
PartSelect #: PS4240743
Manufacturer #: DG32-00002B
This is a range temperature sensor, used to detect the interior temperature of your oven when it is baking or cooking. If you notice your oven is baking unevenly or at inconsistent temperatures, will ...
$130.08
  In Stock
Oven Burner Igniter – Part Number: DG94-00520A
Oven Burner Igniter
★★★★★
★★★★★
(12)
PartSelect #: PS4241428
Manufacturer #: DG94-00520A
This is an oven burner igniter made for use with Samsung ovens. This oven burner igniter is designed to ignite the gas that flows into it, to produce heat. However, over time and with further frequent...
$218.00
  In Stock
Knob – Part Number: DG64-00473A
Knob
★★★★★
★★★★★
(6)
PartSelect #: PS9606608
Manufacturer #: DG64-00473A
This stainless steel knob dial on your range allows you to control the temperature and function of your range. It is found on the front panel. If it is difficult or impossible to adjust the heat setti...
$84.34
  In Stock
LEG-LEVELING;FX710BGS/XA – Part Number: DG61-00525A
LEG-LEVELING;FX710BGS/XA
★★★★★
★★★★★
(4)
PartSelect #: PS4240934
Manufacturer #: DG61-00525A
$23.07
  In Stock
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It preven...
$6.59
  In Stock
Right Rear Burner Cap - Black – Part Number: DG62-00111A
Right Rear Burner Cap - Black
★★★★★
★★★★★
(2)
PartSelect #: PS5576950
Manufacturer #: DG62-00111A
This surface burner cap is specially designed to fit with Samsung ranges. It is a genuine OEM replacement part supplied directly by Samsung to ensure compatibility. The burner cap is a round, black ca...
$63.20
  In Stock
Left Rear Burner Cap - Black – Part Number: DG62-00070A
Left Rear Burner Cap - Black
PartSelect #: PS4240973
Manufacturer #: DG62-00070A
$73.16
  In Stock
Bottom Floor Panel – Part Number: DG61-00570A
Bottom Floor Panel
★★★★★
★★★★★
(8)
PartSelect #: PS4240944
Manufacturer #: DG61-00570A
This oven cavity floor coating or bottom floor panel is an authentic OEM part supplied by Samsung to ensure compatibility with various models of Samsung ranges. It is a protective layer that sits on t...
$179.79
  On Order
BURNER-HEAD(AUX);NX583G0 – Part Number: DG62-00076B
BURNER-HEAD(AUX);NX583G0
★★★★★
★★★★★
(1)
PartSelect #: PS5576948
Manufacturer #: DG62-00076B
$112.56
  In Stock
Range Surface Burner Cap – Part Number: DG62-00067A
Range Surface Burner Cap
PartSelect #: PS4240971
Manufacturer #: DG62-00067A
The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
$86.67
  In Stock
Wire Rack – Part Number: DG75-01001D
Wire Rack
★★★★★
★★★★★
(3)
PartSelect #: PS12721757
Manufacturer #: DG75-01001D
This stainless steel wire rack is a sturdy platform for baking or roasting food, making sure heat circulates evenly. It measures approximately 7/16 inches by 24 3/4 inches and is usually found inside ...
$265.94
  In Stock
Assembly GRATE SIDE;NX58H565 – Part Number: DG94-00937A
Assembly GRATE SIDE;NX58H565
PartSelect #: PS9606629
Manufacturer #: DG94-00937A
$201.32
  In Stock

Questions And Answers for NX58H5600SS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
June 21, 2022
My oven lights and 20 seconds later it will die out, it will relight again. continuing this process over and over. Any ideas what to test and trouble shoot this problem.
For model number NX58H5600SS
PartSelect logo
Hello Scott, thank you for writing. When a Sensor fails PS4240743, the pilot light won't stay lighted. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Dewitt
July 22, 2022
The oven will not heat up
For model number NX58H5600SS
PartSelect logo
Hello Dewitt, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the temperature sensor, the oven igniter, and the pressure regulator and safety valve. You can test the parts with a multi-meter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Osvaldo
January 17, 2023
NX58H5600SS Samsung gas range displayed the -SE- code I unplugged and cleared code but no buttons work after 5 minutes the range beep and displayed -SE- code again.
For model number NX58H5600SS
PartSelect logo
Hello Osvaldo, thank you for contacting us. The SE error code on a Samsung microwave means there is a problem with the touchpad or control board. In most cases, the error is caused by a stuck button or a dirty ribbon cable. In more serious cases, the control board may have a fault that can only be fixed by replacing the control board. Please check the board, part number PS9606529, and the switch membrane, part number PS11735749. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Was this helpful?
Thank you for voting!
Related Parts:
Roger
October 26, 2023
Need a new board oven doesnt work
For model number NX58H5600SS/AA
PartSelect logo
Hello Roger, thank you for reaching out. According to our research, the issue is most probably with the electronic control board, part number PS9606529. We would recommend checking the electronic control board to fix the issue. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Andy
June 15, 2021
Oven control panel does not come on it’s like no power to it
For model number NX58H5600SS
PartSelect logo
Hello Andy, Thank you for the question. If there is power going to the appliance and it is not powering on, this indicates the Power Supply Board may need to be replaced. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2

Common Symptoms of the NX58H5600SS

[Viewing 3 of 3]
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not heating and holding temp
The Samsung stove I have has had the igniter replaced several times. It seems to wear out over a couple years time. I did the repair with a Philips #2 screw driver. Open the oven door, remove the grates. unscrew the bottom cover and expose the heat shield. Unscrew the heat shield. This exposes the burner. Unscrew the burner from the center of the plate/lower heat shield. Unscrew the burner from the front and back of the oven. Carefully lift up the burner to expose the igniter and clip. Unscrew the igniter from the burner and set the burner aside. Unclip the igniter from the power cable. If it falls below, it won't go far just reach in a lift it back up to fasten the new igniter to the power clip. Refasten to the burner with new clips and screws provided. Re-insert the burner to the gas jet that is below the bottom plate which will not be visible to you unless you place your head towards the rear of the stove and look down. Once the Jet is back into the hole of the burner, re fasten it to the middle back and front of the stove. Replace the covers and grates. Close the oven and test it. A new igniter does wonders. You can remove the stove door for a less intrusive install, but I found it unnecessary to do so and saved a step and time. I was done well under 30 minutes.
Parts Used:
Oven Burner Igniter
  • John from EAST QUOGUE, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
12 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat consistently
My barely 4 year old Samsung range/oven began not heating consistently. Even though it said 350, for example, we had to increase to 465 to get it to bake. Thought it was the temperature sensor. Ordered and installed new one easily. That didn't solve the problem. So, rather than throw more money at parts that may not have resolved the issue, I got a new Amana range. Samsung appliances go to my 'do not buy' list along with LG!
Parts Used:
Range Oven Temperature Sensor
  • Steven from CHEYENNE, WY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
REPLACED THE FLOOR CAVITY
REMOVED THE TWO SCREWS AND THEN THE FLOOR PIECE. THEN REPLACED THE NEW FLOOR CAVITY AND SCREWED THE NEW ONE IN PLACE.
Parts Used:
Bottom Floor Panel
  • Madeleine from CHICAGO, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!