Models > NV51K7770DS

NV51K7770DS (AA-0000) Samsung Wall Oven - Overview

Sections of the NV51K7770DS

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Micro Door Switch – Part Number: 3405-001034
Micro Door Switch
★★★★★
★★★★★
(7)
PartSelect #: PS4131192
Manufacturer #: 3405-001034
$17.04
  In Stock
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
Sold individually.
$6.57
  In Stock
THERMOSTAT;-,NT-101,250V – Part Number: DE47-20037A
THERMOSTAT;-,NT-101,250V
★★★★★
★★★★★
(4)
PartSelect #: PS4226434
Manufacturer #: DE47-20037A
$19.79
  In Stock
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
Range Convection Fan Motor Assembly
★★★★★
★★★★★
(6)
PartSelect #: PS11720787
Manufacturer #: DG96-00110E
The convection fan motor spins the fan blade to circulate hot air through the oven for even heating.
$129.76
  In Stock
Convection Fan Motor - Lower – Part Number: DG31-00005C
Convection Fan Motor - Lower
★★★★★
★★★★★
(1)
PartSelect #: PS11735747
Manufacturer #: DG31-00005C
$127.94
  In Stock
Oven Temperature Sensor – Part Number: DG32-00004C
Oven Temperature Sensor
PartSelect #: PS4240744
Manufacturer #: DG32-00004C
$127.95
  In Stock
Hexagon Nut Cap – Part Number: 6021-001211
Hexagon Nut Cap
PartSelect #: PS4133540
Manufacturer #: 6021-001211
Left hand thread.
$9.14
  In Stock
Convection Fan Blade Spacer – Part Number: DG60-00001A
Convection Fan Blade Spacer
PartSelect #: PS4240847
Manufacturer #: DG60-00001A
$6.57
  In Stock
Hexagon Nut Cap – Part Number: 6021-001208
Hexagon Nut Cap
PartSelect #: PS4133538
Manufacturer #: 6021-001208
$8.13
  In Stock
MOTOR AC FAN-BLOWER;SMB-U367A,2,120V,60H – Part Number: DG31-00027A
MOTOR AC FAN-BLOWER;SMB-U367A,2,120V,60H
PartSelect #: PS12086096
Manufacturer #: DG31-00027A
$224.93
  In Stock

Questions And Answers for NV51K7770DS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Rose
    November 29, 2019
    Is my model and nv51k7770dg the same every time I put my number in everything for the other model comes up
    For model number NV51K7770DS
    Hi Rose, they are not the same sadly, they come up as a separate listings. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Regina
    January 22, 2020
    What are the part numbers for the wire racks, guiding tracks, and temp probe? Will other model number racks or probes work?
    For model number NV51K7770DS
    Hello and thank you for writing. The wire rack is part number PS12086225. The temperature sensor is part number PS4240744 The guiding tracks are no longer being sold, It is possible that other model number racks might fit, but we can not confirm this. We hope this helps. Please contact us anytime if you require further assistance.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the NV51K7770DS

      [Viewing 3 of 3]
      Doesn’t shut off
      Fixed by
      these parts
      Show All
      No heat
      Fixed by
      these parts
      Show All
      Won’t turn on
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Convection oven fans were noisy.
      This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
      Parts Used:
      Convection Fan Motor - Lower Range Convection Fan Motor Assembly
      • Sue from De Soto, IL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers, Socket set
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven shut off during self clean cycle and door stayed locked.
      I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
      Parts Used:
      THERMOSTAT;-,NT-101,250V
      • Uwe from FORT COLLINS, CO
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      6 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bearing went out on the fan
      Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two screws that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm.
      John
      Parts Used:
      Convection Fan Motor - Lower
      • John from NASHVILLE, TN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers, Socket set
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!