Quick Question!

Have you ever purchased from PartSelect.com before?

Models > NJLR473ET0WB > Parts

NJLR473ET0WB Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer NJLR473ET0WB

Below is a list of all parts for the Hotpoint Dryer NJLR473ET0WB - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the NJLR473ET0WB
1-14 of 104
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.69

D-Shaped Knob Insert Clip

This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start...

$3.59

Light Bulb

This lamp, also known as a drum lamp, illuminates and lights up the dryer drum when the door is open. If the light bulb in the dryer is burnt out or lighting is inconsistent, replacing it can solve this problem. No tools are required for this replacement. To repair, first locate the top section in the interior of the dryer and check the bulb. Next, unscrew the bulb by making three to four turns. Pro tip: the bulb cannot be screwed straight in, instead lean it at a 45-degree angle. Refer to the diagram provided by the manufacturer for further instruction and guidance. Remember to unplug the dryer from the power source for your safety.

$53.22

Rear Drum Bearing Kit

This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. Thi...

$11.10

Door Handle - White

This part is on the outer door of the dryer.

$10.58

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

$37.98

Rotary Start Switch

This part is used to start the dryer once you have selected a setting on the timer.

$18.68

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$3.71

LATCH DOOR

This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on the door strike, and will not stay closed, you may need to replace the door latch. This part is square in shape, and is approximately 3/4-inch in length, by 3/4-inch in width. The part is made of white plastic with a metal tab. To access the door latch, you will need to remove the top and side panels on your dryer. To complete this repair, simply pop the damaged door latch out of position, and snap the new one into place.

$6.54

Drum Slide

This slideis sold individually. Some dryers require up to three of these slides . Be sure to check to make sure you order the necessary amount for your dryer.

$4.02

Door Strike

$48.22

Lint Filter with Frame

This part may differ in appearance, but functions same as original.

$4.88

Adjustable Leveling Screw

$5.21

Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

$20.68

High Limit Thermostat

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in when the temperature drops to 210 degrees Fahrenheit. (Limit: 260-50)

All Parts for the NJLR473ET0WB
1-14 of 104