Models > NE59J7630SS

NE59J7630SS ((AC)(0001)) Samsung Wall Oven - Overview

Sections of the NE59J7630SS

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Range Oven Temperature Sensor – Part Number: DG32-00002B
Range Oven Temperature Sensor
★★★★★
★★★★★
(6)
PartSelect #: PS4240743
Manufacturer #: DG32-00002B
This is a range temperature sensor, used to detect the interior temperature of your oven when it is baking or cooking. If you notice your oven is baking unevenly or at inconsistent temperatures, will ...
$130.30
  In Stock
Order within the next 12 hrs and your part ships today!
Thermostat – Part Number: DE47-20037A
Thermostat
★★★★★
★★★★★
(4)
PartSelect #: PS4226434
Manufacturer #: DE47-20037A
This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a sp...
$27.39
  In Stock
Order within the next 12 hrs and your part ships today!
Range Convection Fan Motor Assembly – Part Number: DG96-00110E
Range Convection Fan Motor Assembly
★★★★★
★★★★★
(6)
PartSelect #: PS11720787
Manufacturer #: DG96-00110E
The convection fan motor spins the fan blade to circulate hot air through the oven for even heating.
$160.22
  In Stock
Order within the next 12 hrs and your part ships today!
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It preven...
$9.44
  In Stock
Order within the next 12 hrs and your part ships today!
Triple Burner Switch – Part Number: DG44-01007B
Triple Burner Switch
★★★★★
★★★★★
(6)
PartSelect #: PS11735755
Manufacturer #: DG44-01007B
This surface element triple burner infinite switch, or regulator control, is located in the control panel of your range oven. It is responsible for turning the surface element on or off and adjusting ...
$169.79
  In Stock
Order within the next 12 hrs and your part ships today!
Burner Switch – Part Number: DG44-01006A
Burner Switch
★★★★★
★★★★★
(4)
PartSelect #: PS8764900
Manufacturer #: DG44-01006A
This energy regulator, more commonly known as a surface element control switch or burner switch is compatible with various models of Samsung ranges. It consists of the switch housing and a metal shaft...
$167.40
  In Stock
Order within the next 12 hrs and your part ships today!
Wire Rack – Part Number: DG75-01001D
Wire Rack
★★★★★
★★★★★
(3)
PartSelect #: PS12721757
Manufacturer #: DG75-01001D
This stainless steel wire rack is a sturdy platform for baking or roasting food, making sure heat circulates evenly. It measures approximately 7/16 inches by 24 3/4 inches and is usually found inside ...
$139.88
  In Stock
Order within the next 12 hrs and your part ships today!
Convection Fan Motor - Lower – Part Number: DG31-00005C
Convection Fan Motor - Lower
★★★★★
★★★★★
(1)
PartSelect #: PS11735747
Manufacturer #: DG31-00005C
This genuine OEM left-threaded convection fan motor is responsible for spinning the fan blade, ensuring even circulation of hot air within your oven for consistent cooking. It is typically located beh...
$167.40
  In Stock
Order within the next 12 hrs and your part ships today!
LED Display Board – Part Number: DE07-00129A
LED Display Board
★★★★★
★★★★★
(4)
PartSelect #: PS11720419
Manufacturer #: DE07-00129A
This display board is for ranges. Display board receives signals from the control board and displays the time and temperature settings. Unplug the range or shut off the circuit breaker before in...
$188.94
  In Stock
Order within the next 12 hrs and your part ships today!
Electronic Control Board – Part Number: DE92-03761B
Electronic Control Board
★★★★★
★★★★★
(1)
PartSelect #: PS11720510
Manufacturer #: DE92-03761B
$285.87
  On Order
Hexagon Nut Cap – Part Number: 6021-001211
Hexagon Nut Cap
PartSelect #: PS4133540
Manufacturer #: 6021-001211
This hexagon nut cap, also known as a nut cover cap, is a nylon-insulated cylindrical cap with left-hand threads and a 4mm thread size, for counterclockwise tightening. It is sourced from the original...
$20.21
  In Stock
Order within the next 12 hrs and your part ships today!
Parts Leveling Leg – Part Number: DG61-00432A
Parts Leveling Leg
PartSelect #: PS4240913
Manufacturer #: DG61-00432A
$23.80
  In Stock
Order within the next 12 hrs and your part ships today!

Questions And Answers for NE59J7630SS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the NE59J7630SS

[Viewing 2 of 2]
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Convection oven fans were noisy.
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
Parts Used:
Convection Fan Motor - Lower Range Convection Fan Motor Assembly
  • Sue from De Soto, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven shut off during self clean cycle and door stayed locked.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Parts Used:
Thermostat
  • Uwe from FORT COLLINS, CO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
11 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The triple burner switch would only stay on the highest setting.
I removed the control panel with a Phillips screwdriver and unplugged the burner switch and replaced the new switch and put the control panel back in place and turned on the burner and it worked as it should.i realized that I only would have only had to remove the 4 screws on the bottom of the control panel. All I would have had to do was just take those 4 screws out and remove the switch control knob and the two screws that held the switch in. Am very happy with the results
Parts Used:
Triple Burner Switch
  • Jimmie D. from THOMPSON, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!