Models > NE595R0ABSR

NE595R0ABSR (AA-0001) Samsung Range - Overview

Sections of the NE595R0ABSR

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Range Oven Temperature Sensor – Part Number: DG32-00002B
Range Oven Temperature Sensor
★★★★★
★★★★★
(5)
PartSelect #: PS4240743
Manufacturer #: DG32-00002B
$82.57
  In Stock
Rubber Cushion – Part Number: DG73-00003A
Rubber Cushion
★★★★★
★★★★★
(1)
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
Sold individually.
$6.64
  In Stock
THERMOSTAT;-,NT-101,250V – Part Number: DE47-20037A
THERMOSTAT;-,NT-101,250V
★★★★★
★★★★★
(4)
PartSelect #: PS4226434
Manufacturer #: DE47-20037A
$18.85
  In Stock
Convection Fan Motor – Part Number: DG31-00005A
Convection Fan Motor
★★★★★
★★★★★
(6)
PartSelect #: PS4240735
Manufacturer #: DG31-00005A
The fan motor helps rotate the upper fan blade to circulate the hot air though the oven cavity for even heating. This motor is reverse threaded.
$102.85
  In Stock
Range Oven Bake Element – Part Number: DG47-00038B
Range Oven Bake Element
★★★★★
★★★★★
(4)
PartSelect #: PS4240837
Manufacturer #: DG47-00038B
HEATER-BAKE;A5 BEST/BETT
$117.50
  In Stock
RACK ;FLAT;FE;FTQ;FCQ,MWSR-SWRM,629,41 – Part Number: DG75-01001C
RACK ;FLAT;FE;FTQ;FCQ,MWSR-SWRM,629,41
★★★★★
★★★★★
(3)
PartSelect #: PS7321783
Manufacturer #: DG75-01001C
$150.16
  In Stock
Touchpad Overlay - Black – Part Number: DG34-00020A
Touchpad Overlay - Black
★★★★★
★★★★★
(2)
PartSelect #: PS4240764
Manufacturer #: DG34-00020A
The electronic control board is NOT included. Overlay only.
$100.68
  In Stock
HEATER-BROIL;FE710DRS,IN – Part Number: DG47-00045A
HEATER-BROIL;FE710DRS,IN
★★★★★
★★★★★
(1)
PartSelect #: PS4240842
Manufacturer #: DG47-00045A
$178.86
  In Stock
Range Dual Radiant Surface Element – Part Number: DG47-00056A
Range Dual Radiant Surface Element
PartSelect #: PS4240844
Manufacturer #: DG47-00056A
This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range.   No Longer Available

Questions And Answers for NE595R0ABSR

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Tim
    February 19, 2020
    Does the convection heating element assist in heating up the oven in "bake" mode along with the top and bottom elements?
    For model number NE595R0ABSR
    Hello Tim, Thank you for the question. In ovens with the convection feature, the convection fan will come on during preheat in the conventional cycle also, but will go off when the oven reaches temperature. We hope this helps.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Ana
    January 3, 2020
    I need to replace the glass main cooktop for this model. Do you have it?
    For model number NE595R0ABSR
    Hello Ana, Thank you for your question. The glass cook top for your model is under part PS5577041. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Tim
    February 19, 2020
    My preheat temperature setting would beep to early, the oven temp was off by 300+ degrees, i replaced the control box and still having same issue, what else can i change?
    For model number NE595R0ABSR
    Hello Tim, Thank you for the question. We suggest testing the Sensor, PartSelect Number PS4240743. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps. We hope this helps.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Chris
    July 23, 2021
    I was replacing the broiler element (which melted) and found the rear clip with the red wire had also melted. Can i get a replacement wire?
    For model number NE595R0ABSR
    Hello Chris, Thank you for your inquiry. The connecting wires for the broil element is only sold as part of the main wiring harness. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Robert
    September 13, 2021
    My touch pad won’t respond to #s 4,5,9. All other functions work. I unplugged power, cleaned the ribbon cable connector from the touch pad. When it first acted up is was intermittent but now not at all. How can i tell if it’s the control board de92-03045f or the touch pad that’s defective?
    For model number NE595R0ABSR
    Hi Robert, Thank you for your question. To verify if the touchpad is the issue, you will need to test it with a multimeter for continuity. If the touchpad is fine then you will need to replace the electronic control board. We hope this helps! If you have any questions, please let us know.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the NE595R0ABSR

      [Viewing 1 of 1]
      Little to no heat when baking
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Oven shut off during self clean cycle and door stayed locked.
      I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
      Parts Used:
      THERMOSTAT;-,NT-101,250V
      • Uwe from FORT COLLINS, CO
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      6 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Fan motor was making a loud noise .
      Google search and found videos on YouTube explaining the noise and how to fix it.
      Parts Used:
      Convection Fan Motor
      • frederick from PERRY, OH
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers, Wrench (Adjustable)
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      upper fan motor bad
      My repair went terrible as I was sent the wrong motor 2 times. My stove sat in the middle of my small kitchen for 2 weeks. Finally the 3rd was the correct one except I didn't have the right nut so I waited another day for that to be sent. Everything working good now, I just hope the bottom fan doesn't go out after this experience.
      Parts Used:
      NUT-FLANGE;-,-,MSWR10,-,
      • SUSAN from DAVISON, MI
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Screw drivers, Wrench set
      1 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!