Parts That Fix Maytag Freezer MZF34X16DW01 Fridge too warm
Fridge too warm is a commonly reported symptom for the MZF34X16DW01 Maytag Freezer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MZF34X16DW01 Maytag Freezer that will fix Fridge too warm. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.
Replacing your Whirlpool Refrigerator Evaporator Fan Blade
This temperature sensor is for refrigerators. The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands. The thermistor itself, part WPW10383615, should test at these Ohms depending on temperature. It's recommended to test at room temperature and again in a glass of ice water to make sure it's sensing temperatures properly. So it should read around 3000 - 5000 Ohms at room temperature 7000 - 10000 Ohms at 0°C and 20000 Ohms at -15°C.
Customer Repair Stories
No Defrost Mode After Heating Element Replacement
-
Ray M from Cave Creek, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
The freezer wasn't defrosting.
-
Nancy from JAMESTOWN, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
Customer Repair Stories
Fridge would not start
-
Glen from PT CHARLOTTE, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver