MO1650WA Magic Chef Microwave Parts & Repair Help | PartSelect
Models > MO1650WA Maytag

MO1650WA Magic Chef Microwave - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(3)
PartSelect #:PS11747931
Manufacturer #:WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave....
$6.31
In Stock
(3)
PartSelect #:PS11747959
Manufacturer #:WPR9800486
In your microwave, the diode allows current to flow one-way only, converting alternating current to direct current. If you notice that your microwave does not heat properly, you ma...
$20.72
In Stock
PartSelect #:PS2172588
Manufacturer #:R0713676
Sold individually.
No Longer Available
(2)
PartSelect #:PS11741686
Manufacturer #:WP3405-001034
This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. ...
$35.21
In Stock
(1)
PartSelect #:PS4234960
Manufacturer #:DE74-20016A
The cooking tray can also be known as a turntable tray. This tray is made of clear glass, with an outer diameter measuring approximately 13 and 1/2 inches. The tray comes with 3 ro...
$41.07
In Stock
PartSelect #:PS2150946
Manufacturer #:DE31-10172A
This motor turns the glass tray for even cooking/warming.
No Longer Available
PartSelect #:PS4236334
Manufacturer #:DE92-90508A
$9.05
In Stock
PartSelect #:PS2037508
Manufacturer #:3405-001033
No Longer Available
PartSelect #:PS4231412
Manufacturer #:DE66-90106B
$8.67
In Stock
(2)
PartSelect #:PS4226352
Manufacturer #:DE47-00006A
$9.44
In Stock
Questions and Answers for MO1650WA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

no heat

Black Sleeve Diode – Part Number: WPR9800486
  • Customer: Lisa from PARADISE, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 24 of 24 people found this instruction helpful
I looked up the #1 reason for no heat for my microwave on the site , and using my model number found that 92% of the time it was the Black Sleeve Diode. Ordered the $15 part, and installed it within 30 minutes. Most of the time was used for removing the built in microwave and removing the cover. Replaced the diode by finding it on the diagram that I print... read more

microwave oven blew fuse

Ceramic Fuse - 20 amp – Part Number: WPM0805101
  • Customer: tad from tamarack, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 22 of 30 people found this instruction helpful
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed s... read more

Both bulbs burned out at same time

  • Customer: JOHN C from NORTH BEACH, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 18 of 34 people found this instruction helpful
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten read more