Models > MMV4205BAS > Instructions

MMV4205BAS Maytag Microwave - Instructions

All Instructions for the MMV4205BAS
31 - 33 of 33
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tray inside would not rotate
Removed old coupler with my fingers and installed new one on shaft. Works fine.
Parts Used:
Coupler
  • al from lexington, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Parts Used:
Microwave High Limit Thermostat
  • Glenn from Pedricktown, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Table Will Not Spin
Try to turn Coupler. If it is loose it is broken 1. pull old one out 2. line up keyway on new one and press it in. (If mild resistance was felt while turning coupler it is not coupler most likely drive motor)
Parts Used:
Coupler
  • scott from milwaukee, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MMV4205BAS
31 - 33 of 33
Back to Top