MH7140XFQ1 Whirlpool Microwave - Instructions

First, the screws were removed that held the vent grill to take off grill. The new vent grill was then replaced in a very short time. No problems at all.

I removed the 2 screws holding the broken vent grill, placed the new one in place and put the 2 screws back in place. Took less than 5 minutes from opening package to replacing the grill.

First, I ordered the part.The part was sent to me within 2 days.Then,I removed the old one that was always falling off and mounted the new one. It was a perfect fit.

I have been doing repair on things on my own for years, I am a retired prevenative maintenace supervisor.
While cleaning the microwave vent grill from being old it fell apart, so I ordered the part using the internet to find the a company that has the same part, the part didnt take long before I recieved it. It didnt take five minutes to install it, and it saved me cash in the pocket from someone else to do the work. wallen

We took off the old grille - and simply screwed on the new one. Easy peasy.

I removed the broken tabs with a screwdriver and snaped in the new cover replacing the screws once I had it in place. the entire job took less than 5 min.

put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...

I remove the old broken Grill Vent by loosing two screws and just put the new one and adjusted with the same two screws.

I simply removed the original 2 screws for the old grill, attached the new grill, fastened it with the original screws & It fit perfectly in less than 5 minutes time.

Take out the screws, broken pieces of clip, then put in the new vent grill, replace the screws. Done!

All I had to do was open the microwave door and place the turntable on the designated grooves, wha lah it fit. I am now back in business. Thanks to partselect, I found my replacement, ordered and it was shipped in no time.

took old vent grill and tabs off using phillip screwdriver. started putting new grill on and it wouldnt go on. got to looking and there are two more screws that you have to loosen up so the grill will go into place these two screws are between the two tabs at each end. caution do not over tighten the screws it will break the tabs. overall easy to install.

We visited our daughter and son-in-law for Thanksgiving. They asked if I could fasten it so it would stop sagging onto the microwave door. As I looked, I found the screw fasteners were both broken out and the grill was just resting in place. While Thanksgiving dinner was being completed I looked online, found the replacement part and ordered it. The amazing delivery... Ordered on Thursday and delivered on Saturday. It only took a couple of minutes to get the step stool and screwdriver. Then I completed installing the replacement grill.

Replaced vent with 2 screws. Very easy.

Took screws off of old vent grille and installed new one. Very easy except my old one was a shiny black grille and this one has a matte finish. Description did not say which but I am fine with the part.