Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MH1170XSB0 > Instructions

MH1170XSB0 Whirlpool Microwave - Instructions

All installation instructions for MH1170XSB0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MH1170XSB0
31-45 of 127
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned out light in microwave

  • Customer: DANNY from SAINT JOHNS, FL
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

Replace vent grille

  • Customer: William from GLENBURN, ND
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Removed the two screws on top of vent with a phillips screw driver. Lift the vent up and away from microwave. Push down to snap in new vent and replace the two screws you previously removed. Done!l

Door had impact damage

  • Customer: Bryan from MANISTEE, MI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Opened the door. Removed the top vent cover. Removed the torx head fastener located at the top left of the door above the hinge. Removed door. Cleaned the unit vents and chassis. Installed new door. Re-installed the top vent cover.

broken glass tray

  • Customer: Mary from Ocala, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Washed the glass tray and put in the microwave oven. Easy..

Charcoal Filter clogged

  • Customer: james from SHERRARD, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Remove top grill screws [2] remove grill replace filter put back together.

The display went out

  • Customer: Scott from Washington, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
First I removed the air deflector at the top of the microwave with two screws. Then I removed the single screw that held the control panel. After I removed the control panel I removed all the wires plugged into it, marking the ones with similar plugs so I put them back correctly. The next step was removing the 4 screws that held in the circuit boards and display. Then I reversed the entire process. It was a breeze and saved me hundreds of dollars over a professional repair.

Broke rotating plate, it fell off counter after being washed

  • Customer: Lois P from Morris, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

Burned out light bulb which lit the surface of the range.

  • Customer: Michael J from LORAIN, OH
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.

light that illuminates the range would not work.

  • Customer: bob from SEBASTIAN, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
replaced the socket per recommendations on this web site. this did not correct the problem.

I had broken the glass turn table.

  • Customer: Cheryl from ARVADA, CO
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.

The vent gille was broken

  • Customer: John from Deluth, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
The repair tool less than 5 minutes. The repair part fit perfectly. The new part looks and performs just like the original.

"Lost" microwave tray

  • Customer: Amelia from Charleston, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Took out the turntable parts to ensure I ordered the correct cooking tray. Matching those with photos of related parts on PartSelect worked great. Put turntable drive and support ring in place and cooking tray went in very easily. Plan to order a second one to have on hand for this rental property.

Glass tray shattered

  • Customer: Mouang from Sacramento, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Ordered the glass tray and installed it. Received the orderin about two days.

Screw broke out.

  • Customer: Judy from Marietta, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 5 people found this instruction helpful
Put into place, tightened the screws.

Dropped the glass cooking tray and it broke in half

  • Customer: Emily C from Brandon, MS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson
All Instructions for the MH1170XSB0
31-45 of 127