MGC5430ADB Maytag Cooktop - Instructions

Replaced with a new one.

part was by the brolier drawer inside under stove removed 2 screws on cover/ part was attached to cover removed module line 1-2 fit/ had to use supplied disconects crimped on 4 burner wire leads/taped around module w/ elec. tape put back 2 screws finished. works now.

using the diagram shown on line Looked up the ignition module and ordered it by phone. Received it the next day and installed it within the hour. Previously I had called the repairman and he said it would be a couple of weeks before he could look at it and a service call was $75 plus parts..I fixed it for the cost of the module $34. I am very satisfied.

I removed the old module ,replaced new bracket,crimped new wire lugs on wires. being an electrician for 50 plus years helped.      Thanks   Lloyd

1st unplug stove opened cover to wireing box with a phillips driver removed old part transfered wires one by one installed new part installed cover & pluged in stove & worked line new.

Well I just had to push them on and it was easy for a woman to do

find the part (image is really helpful), buy, and replace. Like I said, it's really easy.

I just lifted the old caps off and put the new ones on the burners
Not tools on mess or fuss

Replaced the ignition module with one from PartSelect. took care of the problem. They had the part in stock. Great service. Got the part in four days.

I used the advise given in the website and it was very informative- the part was exactly where the folks on the website said it would be and although it wasnt the actual maytag part it was easily fitted by using the wire splices i mentioned and it was shipped quickly The whole process took less the 30 min once received. thank you for a very useful site.

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the six wires. Then I repeated those steps in back order. That's it

Removed screws from back right of oven. Found spark module under right side panel of oven. Module connected in a slightly different way, so I had to drill a new hole and use a machine screw to secure it. All wires matched up exactly on new spark module. Replaced side panel, plugged it in and... SPARKS. Cheap and easy replacement and didn't have to call Maytag for repair!

Stove was bought at Lowe's. I called Lowe's, who promptly said to call a local appliance repair firm, which they named. I did so & was told initial call for diagnosis was $99. I said go ahead. Tech. showed up, removed burner from stove top, and agreed with me that it did not work. He said he'd order part call me to schedule repair. In 2 days, he called me to report that they would order the [art, and that another caLL and installing the burner would cost an additional $113.95. I then went on-line & located part. I ordered it from Part Select & it arrived in 2 days, with part and shipping costing $44.00 At first it did not seem compatible with my stove but a technician/friend came by & we found it would work. Installing it was very simple;' two wires had to be connected to terminals on the bottom of the burner unit, it easily locked back in place, I turned the burner on & there was flame,

I have a Magic Chef gas stove, The top burner came off with ease, just a quarter turn then pull up to expose igniter. Only two wires to remove and two phillips head screws to remove to release igniter. I was done in 5 minutes.

So simple would be embarrassed to give any instructions; it is so self evident.