MFI2569VEM10 Maytag Refrigerator - Instructions

Removed old one that was held on by two screws and replaced it with the new one and the two screws.

I removed the pantry drawer, removed the pantry end cap and replaced it with the new part. The only thing that took a little thinking was detaching and reattaching the temperature control slider.

Removed the original part and replaced it with new part

Removed pantry lid,pantry drawer, shelf, two drawers. Unscrewed metal side rail. Removed right side end cap plus attached back rail. Had to figure out how to remove sliding drawer mechanism, not easy, all plastic, easily breakable-reattached that to new right side end cap. Put everything back (not easy-angle makes it hard). Reattached lid to new side end cap and all is well! My husband and I did this-for us it took two people.

I removed the storage drawers, glass shelf and the large drawer. Next I removed the two mounting screws and removed the Pantry End Cap. I moved the slide bar and the drawer guide the the new Pantry End Cap. Then I installed the new Pantry End Cap in the refrigerator and replaced the drawers and shelf. Last, I installed the drawer cover. Job Done!

The repair was easy. chosing the right part required phone help. From the web photo of the part it is not knowable if the part includes the glass window. I had to call. Also I needed help if finding the correct part. But alls well that ends well. And the replacement was easy. Thanks for your interest in my experience.

Was able see the part needed to be replaced from the pictures provided on the site. Part came in a few days. removed the old part and installed the parts in about 20 minutes

I removed the vegetable drawers and glass. Removed the deli drawer and glass. I then used a small nutdriver to remove the small hexhead screw. Once removed I unscrewed the metal slider and screwed it to the new part. I screwed the new part in where I removed the old one. It was pretty easy. I just wish they made that part that breaks off so easily out of metal. I am frustrated by the number of times I need to replace it. PartSelect is great at delivering the part fast.

Followed the diagram and other people's comments. A bit of trouble with the sliding part, but otherwise very simple to change out.

Remove drawers and shelf. Slide out bottom tray. Remove 2 nut screws from side panel. Pop out old panel. Remove drawer sliders. Reattach sliders to new panel. Pop in new panel and tighten screws. Reinstall shelf and drawers.

had ro take off three nuts then two screws that hold on the metal slider for the deli drawer.there are several other plastic parts toremove and put on the new part,but it was fairly easyto take apart and put back on.Have to be patient and pay attention to how they come of and go back on. I was very impressed with delivery, I orderd on line thursday night and recieved the part Saturday morning. thanks

Very quick, three screws and it came out Took rack off old piece and added it to the new part. Screwed back on 5 minutes. 3 years with broken hinge and 5minutes to replace. The parts shipped quick had it two days from purchase. I will use this for future appliance repair.

All I had to do was remove three screws. Took a few minutes to figure out the arm that controls the air flow into the deli section but that was not difficult, and I replaced the piece and put the screws back in. Done! Beats the heck out of having someone from the company where I bought it come out, then go order the part, then come back out to install it. I figure I saved at least $100. Takes NO great talent.

Took of slider for drawer and put them on new part. Unscrewed three screws, took of old part and put on new part and screwed on. If I can do it anyone can.

I removed the ice maker, saw the problem, took the ice maker apart and ordered a new mold. I reassembled it with the new mold and it now makes ice but the control arm remains up after each ice dump. I plan to take the ice maker back out when we leave (we are snow birds in Florida) and see if the arm is properly placed.