Models > MER6555AAB

MER6555AAB Maytag Range - Overview

Sections of the MER6555AAB

[Viewing 7 of 7]

Manuals & Care Guides for MER6555AAB

Click to download
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(66)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$11.73
  In Stock
Order within the next 3 hrs and your part ships today!
Lower Bake Element – Part Number: WP7406P428-60
Lower Bake Element
★★★★★
★★★★★
(120)
PartSelect #: PS11744518
Manufacturer #: WP7406P428-60
At the floor of the oven is the bake element. If your oven is electric, the bake element will likely provide 90 percent of the heat for baking. Therefore, the oven will not heat properly if the baking...
$51.55
  In Stock
Order within the next 3 hrs and your part ships today!
Long Oven Sensor – Part Number: 12001656
Long Oven Sensor
★★★★★
★★★★★
(33)
PartSelect #: PS1570174
Manufacturer #: 12001656
This long oven sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of...
$34.75
  In Stock
Order within the next 3 hrs and your part ships today!
Surface Burner Receptacle Kit – Part Number: 12001676
Surface Burner Receptacle Kit
★★★★★
★★★★★
(19)
PartSelect #: PS1570190
Manufacturer #: 12001676
The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your...
$13.91
  In Stock
Order within the next 3 hrs and your part ships today!
LEVELER-FOOT,SCREW,F/S,NYLON – Part Number: W11665456
LEVELER-FOOT,SCREW,F/S,NYLON
★★★★★
★★★★★
(5)
PartSelect #: PS16875974
Manufacturer #: W11665456
This is a leveling leg for your oven, range, or stove. The leveling legs on your oven allow your appliance to sit perfectly flat. The new one may be longer in length than your original, but will work...
$21.18
  In Stock
Order within the next 3 hrs and your part ships today!
6 Inch Drip Bowl - Black – Part Number: W10290353RW
6 Inch Drip Bowl - Black
★★★★★
★★★★★
(1)
PartSelect #: PS2377817
Manufacturer #: W10290353RW
Sold individually.
$11.20
  In Stock
Order within the next 3 hrs and your part ships today!
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(20)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
This is a replacement oven rack and it is designed for use with ranges and ovens. This is a genuine OEM replacement part. The rack provides a level and stable surface for cookware inside of your appli...
$90.62
  In Stock
Order within the next 3 hrs and your part ships today!
Screw with Washer – Part Number: WP74006515
Screw with Washer
★★★★★
★★★★★
(1)
PartSelect #: PS11744138
Manufacturer #: WP74006515
This is a replacement screw and washer for your oven/range. It is a Phillips-head screw approximately half an inch long, and the washer is approximately 1 inch in diameter. The screw attaches the oven...
$7.95
  In Stock
Order within the next 3 hrs and your part ships today!
Broil Element - Push On Terminals – Part Number: W10201551
Broil Element - Push On Terminals
★★★★★
★★★★★
(19)
PartSelect #: PS2342087
Manufacturer #: W10201551
This broil element is found on the roof of the oven.
$92.36
  In Stock
Order within the next 3 hrs and your part ships today!
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.79
  In Stock
Order within the next 3 hrs and your part ships today!
Range Infinite Burner Switch - 8 Inch – Part Number: WP7403P239-60
Range Infinite Burner Switch - 8 Inch
★★★★★
★★★★★
(21)
PartSelect #: PS11744487
Manufacturer #: WP7403P239-60
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending p...
$57.14
  In Stock
Order within the next 3 hrs and your part ships today!
8 Inch Drip Bowl - Black – Part Number: WPW10290350
8 Inch Drip Bowl - Black
★★★★★
★★★★★
(4)
PartSelect #: PS11752111
Manufacturer #: WPW10290350
This black porcelain drip bowl with a hole in the bottom is intended for use with some electric ranges and cooktops. This drip bowl measures 10 inches in diameter at its widest point. The purpose of t...
$13.13
  In Stock
Order within the next 3 hrs and your part ships today!

Questions And Answers for MER6555AAB

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the MER6555AAB

[Viewing 10 of 10]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Will not program
Fixed by
these parts
Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Parts Used:
Surface Burner Receptacle Kit
  • Richard from Carthage, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
191 of 208 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Parts Used:
Long Oven Sensor
  • David from Westford, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
156 of 196 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper broiler element (of upper over) burnt out
This particular model has a bracket that holds the element close to the oven ceiling, so I had to unscrew that as well as the element mounting screws on the back oven wall. The hardest part (not that hard) was the connectors were really tightly clamped to the element terminal. I had to use pliers to help wiggle them off the tips. Recommend doing this very gently yet firmly - I was worried about ruining the connectors or the wires to the oven. The element was deader than dead and actually fell apart in three places once it was detached. The new replacement element arrived a couple days later. Putting it in was a breeze, although the oven is quite dark and I needed Mrs. Handyman to hold a flashlight so I could get the screws in. Oven works fine now.
Parts Used:
Broil Element - Push On Terminals
  • Todd from San Antonio, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
79 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!