Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB9150AWB > Instructions

MDB9150AWB Maytag Dishwasher - Instructions

All installation instructions for MDB9150AWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB9150AWB
556-570 of 686
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Noisy dishwasher

  • Customer: Thomas from Knoxville, TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Took apart per video on Part Select found broken piece. Ordered new part and replaced 4 days later.

bottom of basket was broken

  • Customer: donald from arnold, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
replaced basket with a new one, so easy even a cave man could do it.....i think.......

would not pump water in the machine.

  • Customer: Della from Nauvoo, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
look the instrution on line and it worked great.

old broken silverware basket

  • Customer: Vincent from Laurel Springs, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I put the new one in and that was all

Heard a grinding noise when the dishwasher was running

  • Customer: Robert from Key West, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I twice watched the 5 minute video on PartSelect on how to repair the Discharge Pump Housing. I disassembled as instructed. One thing I did that the video did not suggest is that I marked the alignment of all parts with a pencil before removing any screws. In the end it only mattered on the main housing that covers the filter. That has to be put back on the way it came off. The repair is complete and for under $50 the dishwasher is running great and quieter than I can ever remember.

Suspected Door Springs broken

  • Customer: Charles from Titusville, FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
After I got the new springs, I pulled the dishwasher out and the springs were fine but the little plastic piece that attaches the spring to the door was gone. So now I had to order the that piece and wait again.

spray arm would not stay in place

  • Customer: Gwen from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just snapped in plastic retainer and works just fine now

Part worn out, needed to replace

  • Customer: Ronald from Tulsa, OK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
No repair, just an replacement. Would recommend this company for good service.

weak spray was leaving the dishes uncleaned

  • Customer: Edward from La Habra, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
removed the lower dish basket; used pliers to undo the lock screw. removed the lower spray arm, transfered heat shields from old part to new, replaced the lower spray arm, hand tightened the lock screw, replaced the lower dish basket....DONE!

The door of my may tag dishwasher fell down

  • Customer: francesco from teaneck, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I replace 2 springs in 10 minutes works very nice. thank you.

Grinding on the drain cycle

  • Customer: michael from Kennesaw, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Saved me from buying a new dishwasher cost less than $100 completely fixed

The Plastic Wheel Broke From The Mounting Strip

  • Customer: LYNN from PUTNEY, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The plastic wheel broke from the mounting strip on the top rack. I removed the top rack, and the broken mounting strip. Just note that one side of the strip needs to be tilted before it can be removed. Clicked in the new wheel and mounting strip. Again, the side requiring you to tilt the strip goes in first. I was good to go in less than ten minutes.

lack of two wheels

  • Customer: Michael from Scottsdale, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replacement part has only 6 wheels. The original part has 8 wheels. The lack of the two extra wheels allows the dish rack to get stuck in the space between the inside of the dishwasher and the door. The extra set of wheels allows the rack to bridge the gap. It is a problem even if you put the rack in the other way around only a bit worse to deal with. The part was designed with four sets of wheels for a reason.

Deep gouges on front panel of the dishwasher.

  • Customer: Loulie from Jacksonville, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I had a Dishwasher tech.. there to check out a leak in the door gasket....he was kind of enough to put then new panel on.. Was a snap.. Two screws.. and good as new. I assisted in the removal of the protective film.. Thank you, Vickie

Wheel Mounting Strip cracked and wheel coming off, top rack kept falling off to the left.

  • Customer: richard from Seattle, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
typed the model # in Google, selected your company. found the model right away. watched the repair video and ordered my parts. came in no time. as the video showed, removed the old broken wheel mounting strip and installed the new mounting strip and the new wheels. wahla - good as new! piece of cake!
All Instructions for the MDB9150AWB
556-570 of 686