MDB8600AWS Maytag Dishwasher - Instructions

ordered the part online per the diagram, the part shipped immediately, replaced part. Works perfectly, this is one of the easiest web orders we have ever dealt with. WOULD DEFINATELY RECOMMEND THIS SITE TO OTHERS!!!

Take out 11 screws to remove door inside remove two wire plugsremove handle assembly plug in two plugs put back in place put inside door back on 11 screws done.all about 8min time

took off the interior and replaced the handle you get real good at this after a few times along with replacing the rack wheels the silverwear basket......

remove door panel cover and latch, replace door latch and replace door panel.very simple operation

Repair was simple. Simply removed the wiring connectors from old latch and plugged onto new one. Positioned switch in place on door and installed screws. Repair was simple and I received the latch the day after I ordered it.

Removing the cover and swapping the old part for the new with the directions from u made it so easy. . . .

The video for this repair was helpful, and the only issue that I had was changing the electric connections that are held on tightly with plastic clips that need to be pried open for removal and replacement. MAKE SURE YOU DISCONNECT POWER AT YOUR FUSE BOX!!

Very easy to install; took me longer to figure out how to get the end pieces off the track. Keep the screws from old part - new part does not include screws. The replacement part is better made than the original.

Remove about 10 screws. unplug the microswitches on the handle. plug the wires onto the new handle and reinstall.

Removed screws that hold door liner in place. Unplugged switch wires and removed latch assembly. Plugged wires onto new assembly. Installed latch into door. Replaced door liner.

OMG! Great online company. Local appliance store was going to chare me 50$ and take 4 days to get it for me. I found Part Select through google and for less than half price the same part was delivered to my front door 28 hrs later! That was using the cheapest shipping too! Awsome company!

Replacing the door handle latch assembly was VERY EASY!! Saved myself and my parents the extra cost of paying someone to do this repair. Who needs a repairman when you have the internet!?! I just followed the directions on the video and had no problem with it. Thanks for posting the video and delivering the part so quickly!

received the new latch assembly quickly from part select.com, when you remove the screws on inside of the door, the old latch needs to be disconected from the wire harness, then replaced with new assembly and screws.10 minute job and it could not have been any easier to complete.

Just like you describe in the online instructions. Disconnected the power supply, removed door screws (torex),romoved electrical connections from old switch, installed them on new switch, aligned door screw holes, and reassembled. As a long time do-it yourselfer, this is one of the best experiences that I have had over the years. The part arrive by ground Fedex the day after I ordered it.As the MAN said "I'll be back" for my other appliance parts when needed.

Removed inside cover of door (several screws around outside edge of door), then the latch assembly itself. Getting the wires to release from the old latch was the most difficult--had to pry the wire clip loose from the inside with a small screw driver.
I saved a great deal by buying the part from PartSelect. I was able to purchase the entire handle/door latch assembly for just a few dollars more than the handle only at another site!