LSXS26326S LG Refrigerator - Instructions

This repair was easy. The ice maker assembly is basically a plug and play unit that requires first removing the ice bucket as described inside the freezer door. Next, remove several screws the support the unit, then gently lifting the ice maker assembly out, just far enough to access the 2 electrical plugs that operate the unit. Carefully unplug the old unit and remove it. Next, plug the new unit and then reverse the disassembly process. I could have done this in 10 minutes had I not been careful not to break anything. No special tools are required.

Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.

just slid it in.

but I' need you to send me where I can send the part to I' have not got a e-mail where to send the part to. here is my order number 20824314 on the part that goten .

Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver

Opened the back and noticed a fan blade off making the motor unbalanced. Ordered a new fan and motor and went to (you tube ) that explained the whole procedure. Couldn’t get any easier.

unfortunately my fridge stopped working. I purchased another but wanted to try and repair the old one. when ew one arrived, the old one was supposed to be put in garage but instead was hauled away. Had delivery return next day but they had as already removed and lost the handle screw for the bottom freezer and the screw that holds handle in place. ordered the handle screw and picked up the nut. very simple to install the screw and put handle back on.

I didn't because the part was never delivered.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.

removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!

Took out the old and replaced the new filter