Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LRFC22750ST

LRFC22750ST LG Refrigerator - Overview

Get Parts and Repair Help for LRFC22750ST

If you know the refrigerator repair part you need, you can browse the list of all parts on the LRFC22750ST, or you can search by name or part description. You can also find your part by where it is located on the LRFC22750ST by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.85

Switch,Push Button

The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on whe...

Order within the next 8 hrs and your part ships today!
$4.35

Stopper,Door

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, installing this part can be a solution to this problem. Make sure to unplug your appliance from the power source before installing this part and safely store food to prevent it from deteriorating. Refer to the diagram provided by the manufacturer for further instruction.

Order within the next 8 hrs and your part ships today!
$11.85

Switch,Push Button

This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is releas...

Order within the next 8 hrs and your part ships today!
$4.80

Holder,Cover(Lower)

This lower holder cover is also known as a toe grille clip, or a kickplate clip. It is designed for use with refrigerators. The main purpose of this part is to hold the molding at the base of your refrigerator in place, it also makes removing the piece of molding simple. If you notice that the kickplate on your appliance is loose or will not stay in place you may need to replace one or more of these clips. This part is made of plastic, and it is sold individually.

Order within the next 8 hrs and your part ships today!
$15.54

Compressor Start Relay

Order within the next 8 hrs and your part ships today!
$4.35

Screw,Customized

Order within the next 8 hrs and your part ships today!
$41.14

Light Socket

Order within the next 8 hrs and your part ships today!
$22.05

Cover,Lamp

Order within the next 8 hrs and your part ships today!
$11.85

Tube,Inlet

Order within the next 8 hrs and your part ships today!
$48.25

Basket Assembly,Door

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Remove and replace light switch

  • Customer: Debbie from Waltham, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 27 people found this instruction helpful
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator. read more

two screws and done

  • Customer: Daniel from TROY, MI
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
part fit into slot and screwed them down read more

I lost the part in a move.

  • Customer: Kathleen from YUCCA VALLEY, CA
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 2 people found this instruction helpful
It was so easy I opened the package and took part right out and put it on the refrigerator and bolted it down and that's it. read more