Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LFD22860SW

LFD22860SW LG Refrigerator - Overview

Parts and Repair Help for models starting with LFD22860SW

If you know the refrigerator repair part you need, you can browse the list of all parts for models starting with LFD22860SW, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with LFD22860SW

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.85

Switch,Push Button

The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on whe...

$4.35

Stopper,Door

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, installing this part can be a solution to this problem. Make sure to unplug your appliance from the power source before installing this part and safely store food to prevent it from deteriorating. Refer to the diagram provided by the manufacturer for further instruction.

$69.64

Drawer Rail Guide - Right Side

This guide rail, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer section of your refrigerator. This slide rail supports the storage basket in y...

$15.54

ROLLER ASSEMBLY

This part is sold individually. This part is white plastic on the outside and metal on the interior, with a hole in the middle. The roller assembly is found in your refrigerator. You will find this part on the frame in between the two drawers. This part allows the crisper drawer to slide with ease back and forth. You may notice that your drawer is not opening smoothly and this may be due to the wear and tear of the roller assembly. It is common for rollers to wear out at the same speed so we suggest replacing all the rollers at the same time.

$4.80

Holder,Cover(Lower)

This lower holder cover is also known as a toe grille clip, or a kickplate clip. It is designed for use with refrigerators. The main purpose of this part is to hold the molding at ...

$15.54

Compressor Start Relay

$11.85

Switch,Push Button

$4.35

Bush

$81.56

Crisper Cover - Frame Only

Glass NOT included.

$8.63

Cam,Shaft

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Remove and replace light switch

  • Customer: Debbie from Waltham, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 27 people found this instruction helpful
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator. read more

two screws and done

  • Customer: Daniel from TROY, MI
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
part fit into slot and screwed them down read more

I lost the part in a move.

  • Customer: Kathleen from YUCCA VALLEY, CA
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 2 people found this instruction helpful
It was so easy I opened the package and took part right out and put it on the refrigerator and bolted it down and that's it. read more