Models
>
LDT7808BD
LDT7808BD LG Dishwasher - Overview
Models starting with LDT7808BD
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
HOLDER
PartSelect #: PS12081829
Manufacturer #: MEG64438801
This holder, also known as a mounting bracket, is responsible for securing the dish rack in place inside your dishwasher during cleaning. It is a genuine OEM replacement part sourced directly from LG ...
$8.79
In Stock
ROLLER ASSEMBLY
PartSelect #: PS12075858
Manufacturer #: 4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
$9.31
In Stock
Diverter Motor - 120V 60Hz
PartSelect #: PS3579323
Manufacturer #: 4681ED3001D
This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, ...
$40.42
In Stock
HOSE ASSY, DRAIN
PartSelect #: PS16621806
Manufacturer #: AEM74333104
This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used wat...
$68.23
In Stock
Dishwasher Water Inlet Valve
PartSelect #: PS8769826
Manufacturer #: 5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$99.29
In Stock
ACCESSORY ASSEMBLY
PartSelect #: PS11775863
Manufacturer #: 5001DD4001C
This installation brackets kit is for installing and securing your dishwasher to the surrounding cabinets or under the countertop to prevent movement or tilting during operation. These silver brackets...
$27.20
In Stock
HOLDER
PartSelect #: PS12081827
Manufacturer #: MEG64438601
This LG Dishwasher rack holder, also known as a tine row retainer, is compatible with various models of LG dishwashers. It is designed to secure the tine row to the dishrack to ensure it does not move...
$11.41
In Stock
Common Symptoms of models starting with LDT7808BD
[Viewing 3 of 3]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dishwasher would stop during the cycle with nE code
This was my first time repairing a dishwasher. I watched YouTube on how to remove the dishwasher from the cabinet. Afterwards, I removed the bottom of the dishwasher while it was laying flat to get to the motor and micro switch. The only difficulty I had was getting to the motor which required taking the bottom section off of the dishwash
... Read more
er. I could not get an appliance repair company to work on an LG dishwasher. My only option was to repair the dishwasher or bought a new dishwasher. Therefore, my wife and I decided to , make an attempt to repair this one with a backup plan of buying a new one. Luckily, we were able to fix this one within two hours.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
This was a $999 dishwasher. We saved the cost of a new dishwasher by taking the time to fix this one.
Read less
Parts Used:
-
Kenneth from BOX SPRINGS, GA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Parts Used:
-
Lenny from KIRTLAND, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
BOTTOM TRAY OF DISHWASHER WOULD SLIDE ALL THE WAY OUT WITH NO STOP
Was not able to see where the Stopper, Rollers ( Part # PS3523062) could be attached to the back of the bottom tray, to fix the problem. So the parts were useless.
Parts Used:
-
RICHARD from MURRIETA, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!