Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LDS5811WW (LDS5811WW /01)

LDS5811WW (LDS5811WW /01) LG Dishwasher - Overview

Get Parts and Repair Help for LDS5811WW

If you know the dishwasher repair part you need, you can browse the list of all parts on the LDS5811WW, or you can search by name or part description. You can also find your part by where it is located on the LDS5811WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.63

Connector Assembly

This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too q...

$5.72

Roller with Axle

The rack roller and axle in your dishwasher allows the dish rack to slide in and out effectively.If you notice that your dish rack is not performing this function, or if one or more of your rack rollers are damaged, you should consider replacing it. The roller attaches to the dish rack with the axle, both are included in this part. This part is gray in color, and measures 1 inch in diameter. With the axle, this part is approximately 1-1/2 inches wide. To access the rack roller and axle, you will need to remove the top dish rack from your dishwasher.

$4.35

Roller Assembly

The dishwasher roller assembly connects to the dishrack, and is located in the upper level of the dishwasher. It allows the dishrack to easily slide in and out. If the upper rack k...

$59.13

Circulation Pump Motor - 120V 60Hz

On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pump motor may need to be replaced. If this part is for your washer, you may notice your clothes are not cleaning properly. In your washer, to access this part you will need to remove the entire front panel. The circulation pump is 120 volts and 30 watts. The part is white in color and is sold individually. This OEM part comes directly from the manufacturer.

$21.72

Accessory Assembly

This is an accessory assembly, otherwise known as a mounting bracket kit, for a dishwasher. This kit includes two brackets, a hose clamp, and two screws. The brackets are perforate...

$29.84

Basket Assembly,Spoon

This is called a basket assembly, but it may also be known as a silverware basket and it is used in conjunction with your dishwasher. The purpose of this part is to sit on the lower dishrack, and be a stable place for your silverware to rest during the dishwashing cycle. This part is made entirely of plastic, and it is gray in color. The basket measures to be roughly 3 inches wide, by 10 inches high, by 18 inches deep. This specific model has a handle, and all three compartments have a flip top.

$4.35

Pump Gasket

This is a pump gasket, also known as a pump housing seal, for a dishwasher. The gasket is fitted around the edge of the pump, preventing leakage between the pump housing and the fi...

$36.99

HOSE ASSEMBLY, DRAIN

Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.

$28.71

Door Gasket - Black

This is a door gasket for a dishwasher. It creates a watertight seal between the dishwasher door and tub to prevent leaking while the appliance is in use. The gasket is approximate...

$8.63

Spring,Hinge

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher door became heavy and would fall to the floor if you didn't hold it up.

  • Customer: Charles from DENNIS, MA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while you have the dishwashe... read more

Dispenser wasn't closing

  • Customer: Kristyn from Downers Grove, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
Unscrewed the screws, displaced the dispenser and re installed the screws read more

Two Rollers missing on lower tray.

  • Customer: Thomas from BOYNTON BEACH, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 6 people found this instruction helpful
Snapped the rollers on. read more