This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part co...
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pu...
This is a door gasket for a dishwasher. It creates a watertight seal between the dishwasher door and tub to prevent leaking while the appliance is in use. The gasket is approximately 76 inches long an...
This is a pump gasket, also known as a pump housing seal, for a dishwasher. The gasket is fitted around the edge of the pump, preventing leakage between the pump housing and the filter housing. Locate...
Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
February 14, 2020
Keep getting an he error. It looks like i need to replace the heating element.
For model number LDS5040ST
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Heater Assembly - Part# PS3527787
Not a question but a comment. I had e-mailed in earlier that i was having trouble with the ne code coming on after the dishwasher had completed its cycle. It was recommended that the vario motor be replaced, which i did. The ne code was still appearing so it was pointed out through youtube tutorials that the position indicator switch might need replacing, which i did.The ne code was still appearing at the end of the cycle so i watched more youtube tutorials, and found that when replacing the vario motor, you need to remove the small plastic cam switch that slides over the stem on the back of the vario motor, which i had thrown away with the old motor. so after purchasing a new cam switch and putting back on the new motor, my dishwasher is running perfectly! i am very pleased that you could help me and have the exact replacement parts that i needed. you saved me a whole lot of money !
thank you, tony
For model number LDS5040ST
Hello Tony, thank you so much for your comment. We are very happy to hear that your dishwasher is now is running perfectly. Its always our pleasure to help and so good to know how your repair turned out. We hope you have a great day!
Was this helpful?
Thank you for voting!
Jacquie
September 18, 2021
Do you sell a heating element for this model of LG dishwasher?
For model number LDS5040ST
Hello Jacquie, thank you for writing. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3527787. Good luck with your repair.
I need bolts to attach the dishwasher in it’s place while renovating. Side bolts got lost, now dishwasher is not fitted properly in its place.
For model number LDS5040ST
Hello Lopa, Thank you for contacting us. The Bolts are only sold as part of the Mounting Kit. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3655985. Thank you for the inquiry, good luck with the repair!
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while you have the dishwasher pulled out. Push dishwasher back in and mount with screws.
Replacing the spring and connector assembly (the cord had frayed and broken) was easy and took only a matter of minutes to do. Wrestling the dishwasher in and out of its space under the counter was very difficult. Because my kitchen is compact, I had to move the refrigerator first, then disconnect the Romex cable and water lines from the dishwasher before I could pull it fully from under the counter. The side panels have screws in the front and the back, so the appliance had to be moved out until its back was exposed. But I got the job done and the door works just like a new one now!
When I turned the dishwasher over I discovered the PS3579323 diverter motor had failed due to a leak around the PS3536016 valve, check. No use replacing the diverter motor without fixing the leak so I turned the machine back over and disassembled the spray arms and top of the pump cover which reveled the case assy and the valve, check. Upon removal of the valve, check I discovered hair wrapped around it which compromised the MO31 packing and caused the leak. I probably could have just cleaned out the hair and reassembled it but because my installation is a bit of a pain I elected to change the case assy (because of a slight depression where the packing sets) the M031 packing, the MO25 valve, check, and the MO35 pump gasket. After that was accomplished I turned the machine upside down and replaced the MO26 diverter motor and reinstalled the dishwasher. End result: Ne code cleared, no leaks and now the dishes are clean on the top shelf and the wife is happy. There are great instruction videos on YouTube. Good luck!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
