Models > LDF5545BB

LDF5545BB ((00)) LG Dishwasher - Overview

Sections of the LDF5545BB

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
HOLDER – Part Number: MEG64438801
HOLDER
★★★★★
★★★★★
(4)
PartSelect #: PS12081829
Manufacturer #: MEG64438801
This holder, also known as a mounting bracket, is responsible for securing the dish rack in place inside your dishwasher during cleaning. It is a genuine OEM replacement part sourced directly from LG ...
$8.79
  In Stock
HOLDER – Part Number: MEG64438901
HOLDER
★★★★★
★★★★★
(1)
PartSelect #: PS12081830
Manufacturer #: MEG64438901
This is a dishrack holder designed for various models of LG dishwashers. The purpose of this holder is to secure various parts within the dishwasher, such as the cutlery basket. This holder measures a...
$8.79
  In Stock
ROLLER ASSEMBLY – Part Number: 4581DD3003C
ROLLER ASSEMBLY
★★★★★
★★★★★
(1)
PartSelect #: PS12075858
Manufacturer #: 4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
$9.31
  In Stock
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
Diverter Motor - 120V 60Hz
★★★★★
★★★★★
(6)
PartSelect #: PS3579323
Manufacturer #: 4681ED3001D
This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, ...
$40.42
  In Stock
HOSE ASSY, DRAIN – Part Number: AEM74333104
HOSE ASSY, DRAIN
★★★★★
★★★★★
(3)
PartSelect #: PS16621806
Manufacturer #: AEM74333104
This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used wat...
$68.23
  In Stock
Dishwasher Water Inlet Valve – Part Number: 5221DD1001E
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(2)
PartSelect #: PS8769826
Manufacturer #: 5221DD1001E
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$99.29
  In Stock
BUSH – Part Number: 4830ED4001B
BUSH
PartSelect #: PS12075919
Manufacturer #: 4830ED4001B
$8.28
  In Stock
RACK – Part Number: MGR62762103
RACK
★★★★★
★★★★★
(1)
PartSelect #: PS12749078
Manufacturer #: MGR62762103
$154.17
  In Stock
STOPPER,ROLLER – Part Number: 4620ED3001C
STOPPER,ROLLER
PartSelect #: PS12075859
Manufacturer #: 4620ED3001C
$8.80
  In Stock
RACK – Part Number: MGR62482102
RACK
PartSelect #: PS12082040
Manufacturer #: MGR62482102
$15.78
  In Stock
ACCESSORY ASSEMBLY – Part Number: 5001DD4001C
ACCESSORY ASSEMBLY
PartSelect #: PS11775863
Manufacturer #: 5001DD4001C
This installation brackets kit is for installing and securing your dishwasher to the surrounding cabinets or under the countertop to prevent movement or tilting during operation. These silver brackets...
$27.20
  In Stock
COVER ASSEMBLY,LOWER – Part Number: 3551DD2001X
COVER ASSEMBLY,LOWER
PartSelect #: PS11775862
Manufacturer #: 3551DD2001X
$41.72
  In Stock

Questions And Answers for LDF5545BB

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the LDF5545BB

[Viewing 3 of 3]
Not cleaning dishes properly
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Parts Used:
ROLLER ASSEMBLY
  • Lenny from KIRTLAND, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
BOTTOM TRAY OF DISHWASHER WOULD SLIDE ALL THE WAY OUT WITH NO STOP
Was not able to see where the Stopper, Rollers ( Part # PS3523062) could be attached to the back of the bottom tray, to fix the problem. So the parts were useless.
Parts Used:
STOPPER,ROLLER
  • RICHARD from MURRIETA, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
to change the clip that holds the the upper rack the whole rail must be changed
you need to carefully apply a little pressure to the rail moving it back towards the back of the tub, this will let it unhook from the tub, then just slide the new rail into place.
Parts Used:
HOLDER
  • Gregory from YONKERS, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!