Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDS30IXBL1 > Parts

KUDS30IXBL1 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDS30IXBL1

Below is a list of all parts for the KitchenAid Dishwasher KUDS30IXBL1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDS30IXBL1
57-70 of 201
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This part is used to cover the chopper blades.



The holder is commonly referred to as a center wash arm support, holds the center washing arm of your dishwasher in place. This plastic holder is approximately 5 inches long by 4 inches wide, and should fit snug on the spray arm to allow it to clean the dishes properly. If your dishes are not being thoroughly, or evenly cleaned, the holder may be loose and the wash arm will be unable to function properly.


Positioner - Gray

Sold individually.



This OEM dishrack guard clip fits on the front of the upper dishrack and acts as a bumper between the rack and inner door panel. This guard clip is approximately 3 inches long and made of plastic. To replace this part, open the dishwasher door and then slide the upper dishrack out, then simply unclip the faulty guard clip before fastening the new one.



Turbo zone manifold.


Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.




Lower Spray Arm Hub - Gray

The lower spray arm hub sits inside the dishwasher at the base, and feeds water into the lower spray arm. The arm hub is made of plastic and measures 3 inches long by 1.5 inches wide. If the spray arm becomes loose, or does not spin freely, check for damage to the spray arm hub. This is a genuine OEM replacement part sourced directly from the manufacturer.


Rack Adjuster Housing - Left Side

This rack adjuster housing attaches the dishrack adjusters and the wheels to the dishrack. This rack adjuster housing is designed for use on the left side of the upper dishrack. Th...


Side Mounting Bracket Kit

This mounting kit can be used on solid surface countertops.


Power Cord Kit

Includes power cord and all necessary parts needed for complete installation of cord.


Drain Hose

This is a flexible drain hose that is 12 feet long.


Rack Adjuster Housing - Right Side



All Parts for the KUDS30IXBL1
57-70 of 201