Models > KUDS30IXBL0 > Instructions

KUDS30IXBL0 KitchenAid Dishwasher - Instructions

All Instructions for the KUDS30IXBL0
286 - 300 of 822
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Really loudly
Changed the sump pump
Parts Used:
Sump and Motor Assembly
  • Hector from BOLINGBROOK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Changed out the rack adjusters and wanted new clips to complete the project
They snapped into place very easily no tools required
Parts Used:
Rack Stop Clip
  • Elette from EL CAJON, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A top rack assembly wheel came off
I watched the provided video and followed the very easy installation instructions. It was awesome.
Parts Used:
Dishwasher Positioner
  • David from LENEXA, KS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
PartSelect screwed up.
Couldn't do the repair because you people sent the wrong part.
I ordered #1174536, spray arm seal, but got #wp8268340, bearing.
Waiting for you to make this right.
Please feel free to publish this. Tom Hanna
Parts Used:
Spray Arm Seal
  • Thomas from BLOOMFIELD, MI
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing order
I wish I could describe how my repair went! My order was shipped on August 27 (per: the company's email ). However, I have not received our part, yet and it is September 11! I contacted the company, via email. The company's reply: Check FedEx's tracking. I tried that, but as soon as I got to that site, I remembered......PartSelect NEVER sent a tracking number for FedEx, whaaaat!!! Needless to say, I'm not a happy camper!!!
Parts Used:
Spray Arm Seal
  • Patsy from PFAFFTOWN, NC
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not drain
watch how it was done on computer
Parts Used:
Dishwasher Drain Pump
  • Walter from FRANKSVILLE, WI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plate was missing at the time we purchased the house.
It was ok but screw holes were not in the right spot but we put one in and that is sufficient for now. It prevent thing from follow under it.
Parts Used:
Kickplate - Black Clip Screw - 8-18 x 1/2
  • Barbara from NEWPORT NEWS, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack rear stop broken
Remove any pieces of the rear stop by prying it off the end with small flat blade screwdriver. Make sure rack is fully on the roller tracks and then carefully push the new plastic end piece onto the rack. Be sure to orient it correctly by checking the end piece of the other rack.
I ordered two and replace them both at the same time.
Parts Used:
Rack Stop Clip
  • Linda from BEND, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Simple separation of the parts
The 2 parts snap together .
Parts Used:
Adjuster Housing - Left Hand Adjuster Housing Cover
  • Joseph from FRANKFORT, IN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I never could get the Upper basket removed because I could not take half the retainers
Upper basket removed because I could not take half the retainers
Parts Used:
Dishwasher Positioner
  • Juanita from OOLTEWAH, TN
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
black scratchers from wheel chair
shook bottle and painted waited a day and repeated
Parts Used:
Touch-up Paint - Black Touch-Up Paint - Biscuit
  • Linda from GLEN CARBON, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stops broke
Very easy
Parts Used:
Rack Stop Clip
  • Earl from Youngsville, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The clip on the back upper rail broke
I used pliers to pull the old clip out and pushed the new one in. Easy as that!!
Parts Used:
Rack Stop Clip
  • DONNA from BOONEVILLE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack adjusters fell apart and would not slide back and forth.
I followed the Partselect video for the new installation. Very easy to follow which made new part installation extremely easy. Works perfect now!!!
Parts Used:
Door Latch - Black
  • Joseph from DREXEL HILL, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher not draining on final cycle and smelled of burning
I had a common issue on many dishwashers, the final drain cycle was not draining but the pump was trying to turn. Also, the drain pipe was clean. This issue caused a burning smell, like a circuit board heating up. Half plastic smell, half electrical. I bought a replacement pump, followed the pump replacement video instructions from PartsSelect, and it was replaced in under 15 minutes without any tools.
Parts Used:
Dishwasher Drain Pump
  • Dylan from RIVERSIDE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KUDS30IXBL0
286 - 300 of 822
Back to Top