Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDS01FLSS2 > Parts

KUDS01FLSS2 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDS01FLSS2

Below is a list of all parts for the KitchenAid Dishwasher KUDS01FLSS2. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDS01FLSS2
43-56 of 210
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.26

Upper Rack Wheel

Sold individually.

$32.80

HOSE-FILL

This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.

$23.23

Door Switch

This dishwasher door switch will shut your dishwasher off when the door is opened.

$43.90

Water Inlet

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must order separately.

$41.97

Protector

This part is used to cover the chopper blades.

$6.20

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

$4.88

Screw

$40.41

Float Switch Kit

This kit includes the switch, lever, seal and standpipe. Water that fills your dishwasher lifts the float, and when it reaches a certain level, the float acts as a trigger for the float switch. The float triggers the switch to shut off, thereby shutting off the flow of water into the dishwasher.

$28.37

Spray Arm - Middle

This middle spray arm cleans the dishes by rotating and distributing water throughout the tub.

$28.99

Dishrack Adjuster Housing

This housing comes in two pieces, and with two screws.

$10.30

Power Cord Kit

Includes power cord and all necessary parts needed for complete installation of cord.

$22.36

Dishrack Track Stop

This gray dishrack track stop is located on the upper dishrack track. It refrains the upper dishrack from pulling out too far.

$5.23

Push in Screw Cover

Sold individually.

$20.35

Float Switch

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers this float switch to shut off, thereby shutting off the flow of water into the dishwasher.

All Parts for the KUDS01FLSS2
43-56 of 210