Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KHMS1850SSS2 > Instructions

KHMS1850SSS2 KitchenAid Microwave - Instructions

All installation instructions for KHMS1850SSS2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KHMS1850SSS2
16-30 of 83
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stirrer cover had burn through

  • Customer: J.M. from SARASOTA, FL
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
the burn thru was probably because stirrer motor was not turning, Unplug the microwave .freed the motor up bu manually turning. temporary fix. The cover is held up with small push pin clips. Just pry the cover off with a screw driver or other flat tool. Scrape offf the old silicone. There are two covers in the Kit. you just need 1. Remove the old clips for the roof of the microwave, put a bead of silicone on the new cover where the old was and secure the new cover with the push pins into the clips .

Microwave grill vent broke off from face of appliance.

  • Customer: CRAIG from ATASCADERO, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
The replacement part was identical to that of the original microwave and arrived in perfect condition.

The repair was extremely simple - too screws and a "snap" and it was done.

Couldn't be happier with the results. Thanks, Part Select!

The vent bracket broke, that in which in the entire vent needed to be replaced.

  • Customer: Paul from Vero Beach, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Removed the three screws and replaced the with the new vent.

glass turntable broke in half, ring turn needed replaced

  • Customer: Gail from Cincinnati, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next

Easy fix

  • Customer: Hild, from STRONGSVILLE, OH
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
The part is held in place with two screws. A poor design for sure. The replacement part is a direct fit once the two screws are removed. Reuse the same screws, don't order new ones.

Plastic holders cracked causing the Vent Grill to completely separate from th Microwave.

  • Customer: Vince from LAHASKA, PA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Repair took kess than 5 munutes.. Align plastic guides for the Screws and using a Philips screwdriver commence to tightening same .

Replace vent grille

  • Customer: Kathleen from ROY, WA
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Set in place and installed 2 screws. Took less than 5 min.

Microwave would run but not heat up the food

  • Customer: Jerry from FORT WORTH, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
Removed the microwave from above the oven by loosening the two screws above the microwave. As the unit tilted outward lifted up and the whole unit came out all the time feeding the power cord through the cutout for the power cord. After it was out removed the cover and identified the capacitor and made sure it was discharged and removed and replaced the diode. tested before reinstalling and it heated up just fine. Reversed order and reinstalled . Very easy job maybe a second hand to help fish the power cord when installing and removing.

broken plastic attachment for vent grill cover

  • Customer: judith from holland, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Replacement of new vent grille took less than 5 minutes. I just wished Kitchen Aid made a product that lasted longer than 3 years. My part arrived very quickly, less than a week. Service was great and so was your price. I had no problem locating a replacement part. Kitchen Aid would not give me the parts number so I did not know if I was order the right part. But you photo really helped to narrow the correct part. Thanks

Grill vent was broken

  • Customer: Rick from Ormond Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 6 people found this instruction helpful
All it took was 2 screws and it was done - could not have been simpler.

Plastic tabs sheared off screws

  • Customer: NANCY from CHICAGO, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Removed old screws and pieces of plastic. Replaced new grill vent with old screws. Could not have been any easier

Plastic mounting bracket broken heat/stress

  • Customer: Dwight from Los Lunas, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 2 of 3 people found this instruction helpful
Remove two screws, remove grill/bracket, replace grill/bracket, replace two screws and your done. Recycle if You Can.

broken glass tray

  • Customer: Mary from Ocala, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Washed the glass tray and put in the microwave oven. Easy..

Broke rotating plate, it fell off counter after being washed

  • Customer: Lois P from Morris, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

I had broken the glass turn table.

  • Customer: Cheryl from ARVADA, CO
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.
All Instructions for the KHMS1850SSS2
16-30 of 83