Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KHMS1850SSS0 > Instructions

KHMS1850SSS0 KitchenAid Microwave - Instructions

All installation instructions for KHMS1850SSS0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KHMS1850SSS0
31-45 of 97
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave would run but not heat up the food

  • Customer: Jerry from FORT WORTH, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
Removed the microwave from above the oven by loosening the two screws above the microwave. As the unit tilted outward lifted up and the whole unit came out all the time feeding the power cord through the cutout for the power cord. After it was out removed the cover and identified the capacitor and made sure it was discharged and removed and replaced the diode. tested before reinstalling and it heated up just fine. Reversed order and reinstalled . Very easy job maybe a second hand to help fish the power cord when installing and removing.

Grill vent was broken

  • Customer: Rick from Ormond Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 6 people found this instruction helpful
All it took was 2 screws and it was done - could not have been simpler.

Plastic tabs sheared off screws

  • Customer: NANCY from CHICAGO, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Removed old screws and pieces of plastic. Replaced new grill vent with old screws. Could not have been any easier

replacement of charcoal filters in microwave

  • Customer: Hendrika from Campbell, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
This wasn't really a repair, just an replacement of the filters, which is a regular maintenance requirement.

Plastic mounting bracket broken heat/stress

  • Customer: Dwight from Los Lunas, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 2 of 3 people found this instruction helpful
Remove two screws, remove grill/bracket, replace grill/bracket, replace two screws and your done. Recycle if You Can.

broken glass tray

  • Customer: Mary from Ocala, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Washed the glass tray and put in the microwave oven. Easy..

broken plastic attachment for vent grill cover

  • Customer: judith from holland, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Replacement of new vent grille took less than 5 minutes. I just wished Kitchen Aid made a product that lasted longer than 3 years. My part arrived very quickly, less than a week. Service was great and so was your price. I had no problem locating a replacement part. Kitchen Aid would not give me the parts number so I did not know if I was order the right part. But you photo really helped to narrow the correct part. Thanks

Broke rotating plate, it fell off counter after being washed

  • Customer: Lois P from Morris, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

Diode had burnt out

  • Customer: Benny from OZAN, AR
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Take off top facing over microwave using screwdriver also protection plate for diode and capaitor. Disconnect diode from frame, bracket to capacitor then remove, disconnect wires leaving diode on capacitor for right connection, replace, rewire done.

I had broken the glass turn table.

  • Customer: Cheryl from ARVADA, CO
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.

Glass tray shattered

  • Customer: Mouang from Sacramento, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Ordered the glass tray and installed it. Received the orderin about two days.

Plastic bracket that holds screw was broken

  • Customer: Kathleen from Cherry Valley, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
The repair was simple, just unscrew two screws and put the new one on. Took less than five minutes. Easy fix.

Dropped the glass cooking tray and it broke in half

  • Customer: Emily C from Brandon, MS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson

"Lost" microwave tray

  • Customer: Amelia from Charleston, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Took out the turntable parts to ensure I ordered the correct cooking tray. Matching those with photos of related parts on PartSelect worked great. Put turntable drive and support ring in place and cooking tray went in very easily. Plan to order a second one to have on hand for this rental property.

cooking tray chipped

  • Customer: Nancy from Henderson, NV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
replaced with new one
All Instructions for the KHMS1850SSS0
31-45 of 97