All Installation Instructions for KitchenAid Microwave KHMC1857WSS0

Broken microwave door handle

Oprnef the door frame and took off old handle

Parts Used:

Door Handle - White

jody from HENDERSONVLLE, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Foreclosed home: parts were missing

Having the correct model number helps:
Just place the parts in the microwave and it worked.

Parts Used:

RING-TURN

Glass Cooking Tray

OLIV from OAKLEY, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

it was working fine and it stopped order a fuse and it wasn't the problem

took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse

Parts Used:

Fuse

Herb from Auburn, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burnt Out Light Bulb Replacement

Open compartment, installed bulb, closed compartment

Parts Used:

Light Bulb - 40W

alfred from summerville, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 30 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!

Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!

Parts Used:

Fuse

Stephen from SPRINGFIELD, WV
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers

4 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door of my whirlpool microwave broke off

I purchased the door handle to model KHMS1850SWH0 for around $50; the model I have,KHMS1850SWH1, only offers the entire door as a replacement for over $200. The earlier model door handle fit great with no problems.

Parts Used:

Door Handle - White

Pete from Kensington, MD
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

5 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The glass tray in the microwave got chipped while i was washing it and started to crack.

I just opened the box and set it in. Took all of two minutes.

Parts Used:

Glass Cooking Tray

Amber from Loretto, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Replacement

Easy, perfect

Parts Used:

Glass Cooking Tray

George from Statham, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

changed filters

Replaced filter which came inrecord time.

Parts Used:

Charcoal Filter

Edward from Oakland, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken plate

Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.

Parts Used:

Glass Cooking Tray

JASON from ABSECON, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

replace filter

slide into place under hood

Parts Used:

Grease Filter

Barbara from Cranston, RI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Bulb burned out

You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.

Parts Used:

Light Bulb - 40W

Lester from Mesquite, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

rotating glass dish assembly making stange noise

The lady in the Nova Scotia call center should get all the credit for being able to identify the part I needed from only the very limited information I was able to give her. Employee of the month for her. She also had such a great can do attitude. Lawence Baier

Parts Used: