Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KGSA906PSS00 > Instructions

KGSA906PSS00 KitchenAid Range - Instructions

All installation instructions for KGSA906PSS00 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KGSA906PSS00
46-60 of 65
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

after self cleaning door locked and control panal went of

  • Customer: Sunny from New York, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After describing my problem read the review from other people with a same problem. I can't believe it was so easy not mention how much money I saved. It was the thermostat just needed a screw driver to open about dozen screws from the back panel there it was it was thermostat my 12 years old son just unscrew the two screw and pull tthe pin from both side replaced it with a new one and turn the electric on and there it was every thing is back to normal. My son now has the bragging writes for doing this.

Oven Drawer Roller Snapped Off

  • Customer: Kimberly from Sandusky, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced both rollers....Quick and Easy!!

the small burner cap was dropping pieces of grasy finish from around the edge....it wass either overheated from being left on or dropped on the tile floor

  • Customer: Lois from Tower, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
found the model number on the stove, found the numbers incised on the part, found the part on your website, and double-checked by phone before ordering....it is a quality replacement part

replaced burner grate

  • Customer: JOHN from TOMS RIVER, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
BEST service ever Ordered Fri. received Sat. afternoon.Less than 24 hr.

Worn and discolored oven door gasket

  • Customer: John from Fort Worth, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed retainer screw and retainer. Removed old gasket. Installed new gasket, retainer, and retainer screw. Very simple job.

Wheel broke off oven drawer

  • Customer: Matthew from Plainview, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I got the new wheel and screwed it in by hand. It took like 4 minutes total between taking out the drawer, screwing the new wheel on, and putting the drawer back in

not needed

  • Customer: Peggie from Gresham, OR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
screwed in the new oven light

key pad off button to oven not operating

  • Customer: Rafael from Salinas, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
With great knowledgeable information from your employee i even found my model #!took off knobs and all lower screws to get to key pad simple plug and play install!Tested all before i put back together! perfect very happy customer THANK YOU VERY MUCH!

Used self cleaning and the thermol fuse burned out

  • Customer: Gregory from Lake Geneva, WI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pulled out stove from wall..removed all silver screws that hold range back splash. Removed all black robertson screws that hold back panel...removed thermol fuse..2 wires and a blue fac on fuse. Hooked the 2 wires together to temp use oven. Got fuse from parts select and installed...easy easy easy....never will use self cleaning agai..

The oven shipped without a temperature probe.

  • Customer: jerry from rochester, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unwrapped the package, plugged the probe into the oven, stuck the other end into the chicken.
All Instructions for the KGSA906PSS00
46-60 of 65