Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KGCT366GBL1 > Instructions

KGCT366GBL1 KitchenAid Cooktop - Instructions

All installation instructions for KGCT366GBL1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KGCT366GBL1
16-20 of 20
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burners will not light in the light position

  • Customer: Wesley from Edgewood, WA
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
  • 0 of 0 people found this instruction helpful
With no inctructions removed the counter top burner tried to figure out how to remove the glass. Next removed the burners (remember to place the burnersin a open area in the exact order you remoned them from the stove)The burners are not the same. Now the glass was acessiable to remove. The switch harness was easy to replace. Removed one switch at a time noting how the harness was routed.Remember the stove is upside down. First remove the rubber dirt sheild and washed each sheild. Note the key way on the gas adjust shaft there is a knotch on the switch that must be located and pressed in to place. Complete the 5 switches noting not to remove the termination of the harnes until the very last step. That connects to the main power. I had to cut a wire tie and replace to complete the process. Removing a burner takes a star bit to unscrew the burner from the stove top.

old drip bowls needed replacement

  • Customer: scott from carrollton, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The repain involved removeing two screws in each of the burners. Easy to fix. Looks like new now for a fraction of the cost of replacement.

Burner knobs needed replacing due to hot pan melting them

  • Customer: Marvin from Georgetown, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simiply pulled the old burner knob off and replaced them with the new knobs.
All Instructions for the KGCT366GBL1
16-20 of 20