Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KFP600WH > Instructions

KFP600WH KitchenAid Food Processor - Instructions

All installation instructions for KFP600WH parts

These instructions have been submitted by other PartSelect customers and can help guide you through the food processor repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KFP600WH
1-15 of 61
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The lid to my food processor broke & I lost the disc support for the shredding discs

  • Customer: Diane from Fallbrook, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 25 people found this instruction helpful
The repair was easy as there was no need to use tools. The shocking part was that my order was received on the day after I ordered it. The prompt shipping was totally unexpected and I was happy that it woreked out so quickly.

Broken plastic shaft on food processor.

  • Customer: David from Lewisville, TX
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 18 of 32 people found this instruction helpful
The old broken shaft sleeve did not want to come off. Had to cut it off with a Dremel. Once the old plastic shaft sleeve was off, the new shaft sleeve went on fairly easily. I believe that the shaft sleeve should be made out of aluminum rather than plastic. If that were the case it never would have broken the way the old one did.

Replacement bowl cover for food processor

  • Customer: James from Lincoln, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 12 people found this instruction helpful
I own a great old Kitchenaid food processor. The bowl cover was no longer keeping food in. When I ground cheese, it would spew all over the place if I did not hold the cover down (which i would occassionally forget to do). I was considering purchasing a new food processor, when someone suggested that I try parts select. I was easily able to locate the correct part and for 20 bucks it's like new...saving me about 200.00.
Thank you PartsSelect!
Jim McMann

Bowl Cover was broken

  • Customer: Manuel from Sun City, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 10 people found this instruction helpful
Replaced bowl cover with new bowl cover.

Bowl cover broke on Food Processor, which actuates the Switch

  • Customer: William from Warrensburg, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 8 people found this instruction helpful
I contacted Kitchenaide, and they no longer carry parts, so I ordered from PartSelect and installed the new cover.,

I saved about $190, by repairing instead of purchasing a new Food Processor.

broken bowl

  • Customer: Cathleen from Olympia, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 7 people found this instruction helpful
i placed the bowl in the proper place and twisted it shut. just like it was meant to be.

My disc support, somehow turned up missing.

  • Customer: Ronald from York, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 4 people found this instruction helpful
I unpacked the part and slipped it in place. Took less than 5 minutes. I searched for over a month for this part and your site was the only one that carried a replacement for it.
My Kitchen aid food processor was a gift from my daughter more than 10 years ago and it is still going strong, thanks to this site. Thank you

Slicing Disc

  • Customer: DOUGLAS from CINCINNATI, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 10 people found this instruction helpful
Just droped disc on to unit.

The mixer bowl needed replacing

  • Customer: Marci from South Bend, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 6 people found this instruction helpful
Parts select staff were wonderful to work with. It took 4 months to get my mixer bowl; however, this was a problem with the manufacturer. Everytime I called par Select to question HOW LONG; WHEN; I got a warm and supportive person who helped me contact the manufacturer for an ETA. I finally have my bowl; I will use PartSelect in the future!

Install Rubber foot

  • Customer: Dennis R from Winter Park, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 7 people found this instruction helpful
Simply remove worn foot by pulling up while wisting. Install new foot by inserting smaller diameter end into slot at base of appliance and pushing down until seated.

food processor bowl broken

  • Customer: Linda from Petersburg, AK
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 13 people found this instruction helpful
repllaced the bowl

broken food processor bowl and cover

  • Customer: Greg from Pittsburgh, PA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 8 people found this instruction helpful
Kitchenaid uses multi-piece plastic parts for their food processors. Over time, the seams start to come apart both on the bowl and cover allowing liquids to shoot out the gaps and make quite a mess.

replacing part in food processor

  • Customer: Ann from Tallahassee, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
We were really impressed with how quickly this part was shipped. We needed it fast, and it arrived fast. We will definitely come back to this seller whenever we need appliance parts.

Threw the blade away by accident to the food processor

  • Customer: Joel from DEcatur, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Put it in the bowl it fit perfectly, After we lost the orgianal blade my wife was ready to throw the whole food processor away. You saved me I figure $150.00

Shaft was stuck and would not turn

  • Customer: Wayne from BUENA PARK, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
My wife made a lot of salsa with tomatoes. The tomato juice ran down the shaft and rusted it to the point that it froze up in the oil-lite brash bearing. I could not get the old shaft sleeve off without cutting it with a dermal tool. Next, I pried out the three plastic screw cover on the base of the machine and loosened the three screws that hold the motor assembly to the plastic base. I also removed the bottom of the plastic housing. Since the shaft was frozen in place with rust, I put some light oil around the shaft and let it soak for an hour. Then I got a block of wood and placed it on the top end of the shaft and gently hit it with the hammer several times until the shaft exited the brass bearing. Next I took some emery cloth and cleaned the rust from the shaft. I got some bearing grease and lubed the shaft and reassembled the unit. I put plenty of grease on the area where the shaft exits the base to prevent any future juices running down the shaft. Finally, I pressed on the shaft sleeve and assembled the top processing plastic bowl and lid and powered it up and it worked. This KitchenAide machine was so well built compared to current available models of any brand that I could not see tossing it out. It had to be fixed and I did it. Could not have done it without the availability of parts through this site.
All Instructions for the KFP600WH
1-15 of 61